60R190Q: Top Choice in United States (USA) Utsource Holding Company Limited

Description

Parameter	Description	Value
Part Number	Unique identifier for the component	60R190Q
Type	Type of component	Resistor
Resistance	Nominal resistance value	60 惟
Tolerance	Variation from nominal resistance value	卤1%
Power Rating	Maximum power dissipation at rated temperature	190 W
Temperature Coefficient	Change in resistance with temperature (ppm/掳C)	100 ppm/掳C
Operating Temperature	Range of temperatures where the component can operate safely	-55掳C to +125掳C
Insulation Resistance	Minimum resistance between conductive parts and earth	1000 M惟
Surge Withstand	Ability to withstand voltage surges	1000 V, 10 ms
Mounting Type	Method of attaching the component to the circuit board	Surface Mount
Package/Case	Physical dimensions and shape of the component	2512
Standards/Compliance	Compliance with industry standards	RoHS, REACH

Handling:
- Handle the resistor with care to avoid mechanical damage.
- Avoid touching the resistive element to prevent contamination.
Mounting:
- Ensure the surface mount pads on the PCB are clean and free of debris.
- Apply solder paste to the pads as per the recommended amount.
- Place the resistor on the pads using a pick-and-place machine or tweezers.
- Reflow solder according to the recommended reflow profile.
Soldering:
- Preheat the PCB to 150掳C to 180掳C.
- Use a reflow soldering process with a peak temperature of 230掳C to 250掳C.
- Ensure the soldering time does not exceed 10 seconds.
Testing:
- After soldering, visually inspect the joints for proper alignment and solder flow.
- Measure the resistance value to ensure it falls within the specified tolerance range.
- Test the power rating by applying the maximum rated power and monitoring the temperature rise.
Storage:
- Store the resistors in a dry, cool place away from direct sunlight.
- Keep the components in their original packaging until ready for use.
Disposal:
- Dispose of the resistor in accordance with local environmental regulations.
- Ensure compliance with RoHS and REACH standards for waste management.

(For reference only)