Description
BUY KRC102S https://www.utsource.net/itm/p/12541605.html
| Parameter |
Description |
Value |
| Part Number |
KRC102S |
|
| Type |
Ceramic Capacitor |
|
| Capacitance |
Nominal Capacitance |
100 pF |
| Tolerance |
Capacitance Tolerance |
卤5% |
| Voltage Rating |
DC Voltage Rating |
50 V |
| Temperature Range |
Operating Temperature Range |
-55掳C to +125掳C |
| Case Size |
Capacitor Case Size |
0805 (2012 Metric) |
| Termination |
Termination Type |
SMD (Surface Mount Device) |
| Dielectric |
Dielectric Material |
C0G (NP0) |
| Insulation Resistance |
Minimum Insulation Resistance at 25掳C |
1000 M惟 |
| ESR (Equivalent Series Resistance) |
Maximum ESR at 1 MHz |
0.1 惟 |
| DF (Dissipation Factor) |
Maximum Dissipation Factor at 1 MHz |
0.1% |
| Lead-Free |
RoHS Compliance |
Yes |
| Packaging |
Packaging Type |
Tape & Reel |
| Manufacturer |
Manufacturer Name |
Kemet |
Instructions for Use
Handling:
- Handle the KRC102S with care to avoid mechanical damage.
- Use appropriate ESD (Electrostatic Discharge) protection measures.
Mounting:
- Ensure the PCB (Printed Circuit Board) is clean and free from contaminants.
- Place the capacitor on the PCB using standard SMD placement equipment.
- Apply solder paste or flux as required.
- Reflow solder according to the recommended temperature profile:
- Preheat: 150掳C to 180掳C for 60 to 90 seconds.
- Soak: 180掳C to 210掳C for 60 to 90 seconds.
- Peak: 230掳C to 250掳C for 10 to 20 seconds.
- Cooling: Rapid cooling to below 100掳C within 60 seconds.
Storage:
- Store in a dry, cool environment to prevent moisture absorption.
- Use within 6 months of receipt for optimal performance.
Testing:
- Test the assembled PCB to ensure proper functionality.
- Verify capacitance and voltage ratings using a multimeter or capacitance meter.
Disposal:
- Dispose of the capacitor according to local environmental regulations.
- Recycle where possible.
(For reference only)
More detail about Utsource Holding Company Limited
