CS8655E: Top Choice in United States (USA) Utsource Holding Company Limited

Description

Parameter	Description	Min	Typ	Max	Unit
Supply Voltage	Operating voltage range of the device	2.7		5.5	V
Operating Current	Current consumption during operation		3.0		mA
Standby Current	Current consumption in standby mode		0.1		渭A
Output Voltage	Voltage level at output under specified conditions		3.3		V
Output Current	Maximum continuous output current		20		mA
Input Offset Voltage	Maximum difference between input terminals		2		mV
Bandwidth	Frequency range over which the device operates correctly		1		MHz
Rise Time	Time for output to rise from 10% to 90% of final value		10		ns
Fall Time	Time for output to fall from 90% to 10% of final value		10		ns

Power Supply Connection:
- Connect the power supply within the operating voltage range (2.7V to 5.5V).
- Ensure stable power supply to avoid fluctuations affecting performance.
Signal Input:
- Apply input signals within the specified bandwidth to ensure accurate processing.
- Keep input offset voltage within the specified limits to prevent signal distortion.
Output Configuration:
- Configure output settings according to the required output voltage and current specifications.
- Ensure load connected to the output does not exceed the maximum continuous output current.
Operating Conditions:
- Operate within the recommended temperature range to maintain reliability.
- Use proper heat dissipation methods if operating near maximum power levels.
Standby Mode:
- To enter standby mode, set the appropriate control signals as per datasheet.
- Monitor standby current to ensure low power consumption.
Testing and Calibration:
- Regularly test the device to ensure it meets the specified parameters.
- Perform calibration if necessary to maintain accuracy over time.

Note: Detailed specifications and additional instructions can be found in the official datasheet provided by the manufacturer.

(For reference only)