This is circulating lubricator, which means the oil flows out, then comes back into the oil tank through the cyclic inlet, thus could save the usage volume of oil. The cyclic inlet has magnetic filter, which can block the impurities and assure the oil clean.
CEH type could be controlled by PLC (Programmable Logic Controller) or not.
After installing and connecting the oil pipe, feed oil till oil flows out, then start to use this lubricator.
It used a high quality alloy steel gear pump and induction that not only has steady output pressure and low noise, but also can assure each lubrication point with output of oil. It can be applied for large machines' request.
It has a pressure-regulating valve, which can adjust the pressure and easy to check from the pressure gauge.
It has a float switch that can detect the volume of oil. It will have abnormal signal automatically when the oil level is lower than the standard.
CEH type could be installed a pressure switch for detecting pressure and power indicator as customers' request.
Malaysia
