3 types of data processing devices (Desktop PC, Laptop PC, and Table PC) are available. You may select which device to use depending on the usage or installation space.
ACCTee, roundness measurement and analysis software highly reputed for its operability, was modified to be used exclusively for RONDCOM TOUCH. The operation was made smoother by integrating the icons necessary for measurement and analysis into a single screen.
Available in any following languages and able to use anywhere in the world.
Model | RONDCOM TOUCH | ||
Measuring system | Manual | ||
Measuring range | Max. measuring diameter | Φ150mm | |
Right/left feed range (X-axis) | ±80mm (Manual) | ||
Up/down feed range (Z-axis) | 162mm (Manual) | ||
Max. loading diameter | Φ240mm | ||
Max. measuring height | 160mm | ||
Rotation accuracy JIS B 7451-1997 | Radial direction | (0.04 + 6H/10,000) µm | |
H: Measurement height [mm] | |||
Axial direction | (0.04 + 6R/10,000) µm | ||
R: Measuring radius [mm] | |||
Accuracy guaranteed temperature | 15 to 30 degrees | ||
Measurement speed | Rotational direction (θ-axis) | 6/min Fixed | |
Rotary table | Table outer diameter | Φ148mm | |
Adjustment range of centering/tilting | ±2mm/±1° | ||
*with fixed point surface | |||
Loading mass | 15kg | ||
Detector | Detection range | ±400µm | |
Measuring force | 70mN | ||
Stylus shape | Φ1.6mm Carbide ball | ||
Stylus length | 17mm | ||
Data processing device | Tablet PC, Windows PC, Laptop PC | ||
OS | Windows ® | ||
Communication function | Wireless | Bluetooth ® | |
Wired | USB 2.0 | ||
Measurement analysis software | ACCTee R-TOUCH ver. | ||
Type of filter | Digital filter | Gaussian/Phase compensation 2RC/Spline/Robust (Spline) | |
Cutoff value | Rotational direction (θ-axis) | Low pass | 15, 50, 150, 500 peaks/rotation settable any value range 15 to 500 peaks/rotation |
Band pass | 15 to 500 peaks/rotation | ||
Display magnification | 10 to 220k (22 levels), Auto | ||
Roundness evaluation of form error | MZC (min. zone circle method) | ||
LSC (least square circle method) | |||
MIC (max. inscribed circle method) | |||
MCC (min. circumscribed circle method) | |||
N.C. (no compensation) | |||
Measuring items | Rotational direction | Roundness | |
Flatness | |||
Parallelism | |||
Concentricity | |||
Coaxility | |||
Squareness | |||
Thickness variation | |||
Run-out | |||
Analysis processing function | Notch function (level, angle, cursor) | ||
Profile characteristics graph display (bearing area curve, amplitude distribution function, power spectrum) | |||
Gear analysis | |||
Special function | Alignment assist function, error judgment function, security function | ||
Display unit | Tablet PC: 10.1 inch TFT color LCD with Touch panel (capacitive sensing) | ||
Desktop PC: 19 inch LCD monitor | |||
Laptop PC: 15.6 inch LCD | |||
Recording system | Color printer (optional) | ||
Other | Power supply (voltage to be specified) | AC100 to 240V ±10% 50/60Hz | |
Power consumption | Max. 50 VA (except for printer and tablet PC) | ||
Air supply | Supply pressure: 0.30 to 0.7MPa Working pressure 0.25 MPa | ||
Air consumption volume | 30 NL/min | ||
Supply position | Measuring unit rear surface | ||
Air supply connecting nipple to main unit | One-touch pipe joint for outer diameter Φ8mm hose | ||
Measuring unit | W320 x D410 x H500 mm | ||
Weight | Approx. 26kg |