The Micromag HP/80 follows on from the standard Micromag and has all of the same incredible benefits. This unit was developed to suit high pressure through spindle coolant applications, where the smallest of particles can damage seals, spindles and even the efficiency of the cutting tool.
For further information relating to the benefits and operation please refer to the supplied standard Micromag brochure.
Cleaning
Using the supplied cleaning tool, a fully contaminated core can be cleaned in under 30 seconds! Leaving you with only the metallic particles, which can be easily disposed of, no dirty cartridges!
Application
Grinding, edm machine, laser cutting, super finishing, wash station
Installation Location
Pre- or post-pump, delivery line, spindle feed or premembrane cartridge.
| Product number |
Flow rate ltrs/min. |
Contamination capacity kgs |
Connection ″ BSP |
Dimensions mm |
||
|---|---|---|---|---|---|---|
| A | B | C | ||||
| MM5/HP/80 | 70 | 1 | 1 | 247 | 116 | 125 |
| MM10/HP/80 | 100 | 2 | 1 | 365 | 116 | 125 |
| MM20/HP/80 | 150 | 4 | 1½ | 625 | 116 | 125 |
| Maximum Pressure | 80 Bar g |
|---|---|
| Magnetic Performance | High Intensity |
| Circuit Design | Open |
| Magnetic Material | Rare Earth Neodymium Iron Boron |
| Magnet Grade | N45 – Inspected & confirmed via hystergraph prior to use |
| Temperature | 0°C to 140°C |
| Housing | 316 Grade Stainless Steel |
|---|---|
| Lid | 316 Grade Stainless Steel |
| Tube | 316 Grade Stainless Steel – Aerospace Quality |
Malaysia
