Food Grade Silicone Paste - Spanjaard Malaysia

Food Grade Silicone Paste - Spanjaard Malaysia

Category: Food Grade Pastes Available
For more information, visit our official website at oiltech.com.my

Description

Spanjaard Food Grade Silicone Paste

Product Description

Spanjaard Silicone Paste (Food Grade) is a highly effective non-conductive, water-resistant, colourless, non-staining, non-drying silicone lubricant and protector.


Applications

Spanjaard Silicone Paste (Food Grade) is specifically formulated for use in the food processing industry where incidental food contact may occur. All raw materials used in the manufacture of the product comply with FDA section 21 CFR 178.3570. and the product is registered with the NSF as a category H1 lubricant. The product may also be used in packaging, pharmaceutical and other cleanroom environments. The product is Halaal and Kosher certified. 
 
- Multi-purpose silicone-based paste, excellent for lubricating plastic gears, mechanisms, slides, rails, O-rings, seals, valves and gaskets.
- High performance lubricant, protector and enhancer of most rubber and plastic components.
- Keeps freezer, cold room and refrigerator door seals soft and flexible, ensuring excellent sealing when shut, extending door seal life and reducing refrigeration energy loss.
- Plastics mould release agent suitable for polystyrene and other resins in the manufacture of plastic food and pharmaceutical packaging.
- Electrical insulating compound: highly water / moisture-displacing and electrically non-conductive, ideally suited to protect electric circuits from water / moisture ingress such as electric motors at risk of water damage due to plant washing during and between work shifts.

 
Application Instruction
Apply by hand or grease gun.

 
Typical Properties
TYPICAL PROPERTIES SPANJAARD FOOD GRADE SILICONE PASTE
Consistency – NLGI grade 3
Worked penetration, 25°C, 1/10mm 220
Colour White translucent
Thickener Silica
Drop point, °C No drop point
Evaporation loss 30hrs @ 175°C, % 1.0
Dynamic rust test <1
Copper corrosion – 24hr/100°C Pass
Oil bleed 30h @ 175°C, % 0.2
Water wash out @ 93°C, % 1.0
Timken OK load, kg 1
Oxidation resistance, D942, % 1.0
Dielectric strength, kV/mm 15
Working temperature, °C -40 to 200
   
SILICONE OIL PROPERTIES  
Oil viscosity csT, 40°C 750
Flash point, °C >250


Available Packing
500 gram can



Contact our sales consultant in area: 
Malaysia, Selangor (Klang, Puchong, Shah Alam, Subang), Kuala Lumpur (Sungai Buloh), Negeri Sembilan (Seremban), Melaka, Johor (Johor Bharu, Muar, Batu Pahat), Pahang (Temerloh, Kuantan), Kelantan (Kota Bahru), Terengganu (Kuala Terengganu), Perak (Ipoh), Kedah (Sungai Petani), Perlis, Penang (Bukit Mertajam, Butterworth, Seberang Prai), Sabah (Kota Kinabalu), Sarawak (Kuching), WP Putrajaya, WP Labuan, Indonesia, Singapore, Thailand, Philippines, Vietnam, Laos, Myanmar, Cambodia, Brunei 

More detail about Davor Sdn Bhd
Davor Sdn Bhd
Davor Sdn Bhd Industrial Lubricants Selangor, Bearing Grease Supply KL, Compressor Oil Supplier Malaysia ~ Davor Sdn Bhd
Contact Us flagMalaysia