For reliable signal transmission in control and instrumentation systems, opt for this flexible cable from LAPP. A compact outer diameter of 5.6mm makes it a good fit for setups where space is at a premium. As a LiYCY cable, it has a tinned copper braid over conductors twisted in pairs to provide an effective shield against crosstalk and electromagnetic interference. This construction means it delivers clear signals without noise. The cable comes supplied on a reel with a length of 100m length, so you'll have plenty on hand for either long runs or multiple jobs.
• PVC outer sheath is durable and impact-resistant, for use in harsh environments
• Voltage rating of 250V for compatibility with low-voltage applications
• 5-core design for transmission of different signals at the same time, minimising cable clutter
• Current rating of 4.5A for energy efficiency and minimal heat dissipation
| Attribute | Value |
| Series | UNITRONIC |
| Number of Cores | 5 |
| Cross Sectional Area | 0.25 mm² |
| Screened/Unscreened | Screened |
| Length | 100m |
| Sheath Colour | Grey |
| American Wire Gauge | 24 AWG |
| Outer Diameter | 5.6mm |
| Screen Type | Tinned Copper Braid |
| Core Strands | 14/0.14 mm |
| Current Rating | 4.5 A |
| Minimum Operating Temperature | -40°C |
| Maximum Operating Temperature | +80°C |
| Voltage Rating | 250 V |
| Sheath Material | Polyvinyl Chloride PVC |
| Insulation Material | PVC |
| Fire Behaviour | Flame Retardant |
| Standards Met | EAC |
| Conductor Material | Copper |
| Reference | UNITRONIC LiYCY |
| Earth Cable | No |
| Minimum Bend Radius | Fixed - 6 x D Occasional Flexing - 15 x D |
| Oil Resistant | Yes |
| Filler Material | Non-Wicking Filler |
| Bedding Material | Mylar |
| Conductor Resistance | 79 Ω/km |
| Shielded/Unshielded | Shielded |
Malaysia
