MOBIL DTE 10 Excel 46

MOBIL DTE 10 Excel 46

Category: MOBIL DTE 10 Excel Available
For more information, visit our official website at davor.com.my

Specifications
  • ISO VG: 46
  • Copper Strip Corrosion, 3 h, 100 C, Rating, ASTM D130: 1B
  • Density @ 15.6 C, kg/l, ASTM D4052: 0.850
  • FZG Scuffing, Fail Stage, DIN 51354: 12
  • Flash Point, Cleveland Open Cup, Degree Celcius, ASTM D92: 232
  • Oil Viscosity @ 40 Degree Celcius, cSt: 45.6
  • Oil Viscosity @ 100 Degree Celcius, cSt: 8.45
  • Pour Point (Degree Celcius): -43
  • Viscosity Index: 164
Description

MOBIL DTE 10 Excel 46

Product Description
Mobil DTE 10 Excel 46 are high performance anti-wear hydraulic oils specifically designed to meet the needs of modern, high pressure, industrial and
mobile equipment hydraulic systems. The Mobil DTE 10 Excel 46 is constructed from selected base oils and a proprietary additive system to provide well balanced performance in a range of applications. The products exhibit outstanding oxidation and thermal stability allowing long oil life and minimized deposit formation in severe hydraulic systems using high pressure, high output pumps. The innovative ultra keep clean performance protects critical hydraulic system components from malfunction, such as tight tolerance servo and proportional valves found in many modern hydraulic systems. The shear stable, high viscosity index allows for a wide operating temperature range maintaining maximum hydraulic efficiency and component protection at both low and high temperatures. Outstanding air release properties provide an added measure of protection in systems with low residence time helping to prevent cavitation damage and micro dieseling. The zinc free anti-wear system provides a high degree of protection in gear, vane and piston pumps while also minimizing deposit formation. In addition, Mobil DTE 10 Excel 46 is not acutely or chronically toxic to the aquatic environment (per GHS criteria and OECD testing).

Formulated with extensive laboratory and in-service field testing, these oilscan help provide quantifiable increases in hydraulic efficiency compared to other Mobil™ hydraulic oils. This can translate to reduced power consumption or increased machine output, resulting in monetary savings.

In controlled laboratory efficiency testing, these oils was measured to provide up to a six percent improvement in hydraulic pump efficiency
compared to Mobil DTE 20 when operating in standard hydraulic applications.

In additional laboratory and in-service field demonstrations conducted on a wide range of modern hydraulic systems, the Mobil DTE 10 Excel series
demonstrated, compared to Mobil conventional hydraulic fluids, exceptional oil life, outlasting these fluids by up to three times, while maintaining outstanding hydraulic system cleanliness and component protection. These oils also demonstrated the value of its high viscosity index and outstanding shear stability by operating successfully in temperatures as low as -34°C and by maintaining ISO viscosity grade.

These oils has also been tested in standard vane pumps under controlled conditions directly against competitive products. At the end of the 30 minute test, these oils resulted in less system heat generation and the system temperatures were measured to be 6°C-7°C less than certain competitive products run under identical conditions.

Features
These oils provide outstanding hydraulic system efficiency; ultra keep clean performance, and a high degree of fluid durability. The hydraulic efficiency feature can lead to reduced energy consumption for both industrial and mobile equipment, reducing operating costs and improving productivity. Their excellent oxidation and thermal stability can help to extend oil and filter change intervals while helping to ensure clean systems.

Their high level of anti-wear properties and excellent film strength characteristics result in a high degree of equipment protection that not only results in fewer breakdowns but helps improve production capacity.

mobil dte 10 excel 46 typical properties

Application
• Industrial and mobile equipment hydraulic systems operating at high pressures and temperatures in critical applications
• Hydraulic systems subject to deposit build-up such as sophisticated Computer Numerically Controlled (CNC) machines, particularly where close clearance servo-valves are used
• Systems where cold start-up and high operating temperatures are typical
• Systems requiring a high degree of load-carrying capability and anti-wear protection
• Machines employing a wide range of components using various metallurgy

Typical Properteis
mobil dte 10 excel 46

 

More detail about Davor Sdn Bhd
Davor Sdn Bhd
Davor Sdn Bhd Premium Greases & Oils Supplier Selangor, Industrial Lubricants KL, MRO Spray Products Malaysia, Lubricators & Equipment, Food Grade Lubricants ~ Davor Sdn Bhd
Contact Us flagMalaysia