FOTRIC TD3-LD Industrial Acoustic Imaging Camera
FOTRIC TD3-LD Industrial Acoustic Camera is designed for swiftly detecting Gas Leaks, Partial Discharges, and Mechanical Vibrations in industrial settings. With a lightweight, ergonomic handheld design, no training is needed, ensuring user-friendliness.
Equipped with 96 built-in MEMS digital microphones, these cameras deliver precision ultrasonic information, even in noisy environments. Real-time acoustic image overlays on visible digital images allow precise defect source identification. Enhance gas supply consistency, reduce waste, improve efficiency, and maintain production safety with FOTRIC TD3.
Unparallel Range, Extraordinary Sensitivity
96 Microphone Channels
Enhances signal clarity and spatial resolution for precise sound source localization.
2~ 96kHz Bandwidth Range
TD3-LD captures an extended acoustic spectrum, revealing hidden issues for thorough assessment and diagnosis.
0.3-130m Detection Distance
Covering distances from 0.3 to 130 meters, TD3-LD is ensuring comprehensive detection range.
5 Inches Touchscreen Display
Intuitive control enhances user interaction and simplifies operations.
Robust Operability
The TD3-LD acoustic camera provides a clear visual representation of sound signals, capturing a broad frequency range from 2 to 96 kHz. It features three versatile detection modes, allowing you to isolate a specific sound source or view all sounds that exceed a certain pressure level. Additionally, users can fine-tune their focus by manually filtering sounds based on both amplitude and frequency. This capability is especially useful for zeroing in on signs of gas leaks, mechanical abnormalities, or partial discharges in relatively noisy industrial environment.
Advanced Disgnosis Algoritm — PRPD
Partial discharge (PD) poses a critical threat, eroding insulation and leading to catastrophic failures. Our TD3-LD Acoustic Camera's Phase-Resolved Partial Discharge (PRPD) graphs offer a proactive approach by detecting, locating, and assessing PD activity. Analyzing these graphs provides vital insights into the type, cause, and severity of PD, enabling targeted corrective actions, minimizing downtime, and preventing costly system failures.
Intuitive Data Filtering — Amplitude & Frequency Filter
Our advanced Acoustic Camera TD3-LD with frequency and sound pressure level-based signal filtering is a versatile tool for industrial applications like air leak detection and mechanical anomaly identification. Unlike traditional inspections, it allows precise isolation of sound signatures associated with various problems, enabling pinpoint accuracy in identifying issues that might otherwise go unnoticed until they cause significant damage or operational downtime. This added layer of predictive maintenance empowers organizations to proactively address concerns, saving valuable time and resources, while the amplitude filter further refines inspections by focusing solely on relevant sound sources, eliminating background noise and enhancing efficiency.
Specifications
Product Model |
FOTRIC TD3-LD
|
Microphone channels |
96 MEMS digital microphones |
Acoustic Image FOV |
45° |
Sound pressure sensitivity
|
>0.03 L/min (0.3 MPa, 3m),
>0.05 L/min (0.3 MPa, 10 m) |
Acoustic Image Display |
800 × 480, size 5"LCD capacitive touch screen |
Bandwidth |
2kHz ~ 96kHz |
Detection Distance |
0.3m ~ 130m |
Sound Sampling Rate |
192kHz |
Acoustic Refresh Rate |
25FPS |
Detection Mode |
Leakage Mode + Partial Discharge Mode (PRPD graph is available) |
Storage Capacity |
32GB |
Headphones |
3.5mm 3-part headphone jack (monitor audible sound only supported) |
Battery |
3 batteries, ≥ 2.5 hours per battery, Interchangeable |
Protection Class |
IP51 |
Weight |
1.2kg |
Warranty |
2 years |
Applications
Gas Leak Detection
Gas Leak
Gas Leak
Gas Leak
Mechanical Troubleshooting
Loose Bolt Detection
Mechanical Troubleshooting
Electrical Partial Discharge Detection
Partial Discharge Detection
Partial Discharge Detection
Partial discharge due to insulator failure on high-voltage transmission lines
Partial Discharge Detection
Partial discharge due to insulator failure on the distribution pole
Partial Discharge Detection_Aged Cable