1700ºC Manual Door Small Industrial Furnace

1700℃ manual door industrial furnace is used for quenching, tempering, normalizing, annealing and other heat treatment processes of metal materials, and can also be used for sintering of non-metallic ceramic materials. It is very suitable for small batch production and pilot test in laboratories and factories..

Features

Furnace Shell

1. The shell is made of metal Q235 low-carbon steel, and the surface is electrostatically resistant and anti-corrosion.
2. Strong metal frame shell structure, low furnace surface temperature.
3. The side-opening furnace door structure, the left hinge is fixed, and the operation is convenient.

Refractory

Multi-layer thermal insulation design, double-layer light refractory brick lining with strong structure, high-strength stacking and splicing, no asbestos, low heat loss and low energy consumption

Heating System

1. High-quality MoSi2 heating element, safely and firmly installed on both sides of the furnace, free heat radiation heating in the furnace cavity, energy saving and high efficiency, long service life
2. Heating on both sides (left and right sides), so as to achieve good uniformity in the furnace

Temperature Control Panel

1. PID and SCR control mode, precise temperature control
2. International standard B-type platinum-rhodium thermocouple, temperature range 50-1800 ℃, long service life
3. The furnace door is equipped with a door-opening power-off safety protection switch

Program Controller

1. Advanced controllers that meet complex process requirements
2. Simple operation, flexible programming
3. Programmable 30 segments for a single curve
4. Over temperature and fault alarm, automatic safety protection
5. Optional manual air intake and automatic clamshell exhaust
6. Furnace rapid cooling control system can be selected to realize rapid cooling within the furnace temperature of 400°C

   1700℃ manual door industrial furnace is used for quenching, tempering, normalizing, annealing and other heat treatment processes of metal materials, and can also be used for sintering of non-metallic ceramic materials. It is very suitable for small batch production and pilot test in laboratories and factories..

   Features

   Furnace Shell

7. The shell is made of metal Q235 low-carbon steel, and the surface is electrostatically resistant and anti-corrosion.
8. Strong metal frame shell structure, low furnace surface temperature.
9. The side-opening furnace door structure, the left hinge is fixed, and the operation is convenient.

10. Refractory

    Multi-layer thermal insulation design, double-layer light refractory brick lining with strong structure, high-strength stacking and splicing, no asbestos, low heat loss and low energy consumption

    Heating System

11. High-quality MoSi2 heating element, safely and firmly installed on both sides of the furnace, free heat radiation heating in the furnace cavity, energy saving and high efficiency, long service life
12. Heating on both sides (left and right sides), so as to achieve good uniformity in the furnace

13. Temperature Control Panel

14. PID and SCR control mode, precise temperature control
15. International standard B-type platinum-rhodium thermocouple, temperature range 50-1800 ℃, long service life
16. The furnace door is equipped with a door-opening power-off safety protection switch

17. Program Controller

18. Advanced controllers that meet complex process requirements
19. Simple operation, flexible programming
20. Programmable 30 segments for a single curve
21. Over temperature and fault alarm, automatic safety protection
22. Optional manual air intake and automatic clamshell exhaust
23. Furnace rapid cooling control system can be selected to realize rapid cooling within the furnace temperature of 400°C

Technical Parameter