Standard Gear Head
K6G_B SERIES
K6G_B SERIES

 

K6G_B SERIES

IMS Mechatronics Sdn Bhd flag
Category: Standard Gear Head Available 1 variants are available
Option
K6G_B SERIES
For more information, visit our official website at ims.com.my
Visit Official Site Contact Us
Description



S/No. Model  Gear Ratio
1 K6G3B 3
2 K6G3.6B 3.6
3 K6G5B 5
4 K6G7.5B 7.5
5 K6G9B 9
6 K6G12.5B 12.5
7 K6G15B 15
8 K6G18B 18
9 K6G25B 25
10 K6G30B 30
11 K6G36B 36
12 K6G50B 50
13 K6G60B 60
14 K6G75B 75
15 K6G90B 90
16 K6G100B 100
17 K6G120B 120
18 K6G150B 150
19 K6G180B 180
20 K6G200B 200
21 K6G250B 250
 
SPECIFICATIONS
 
DIMENSION TABLE
PART No. L Application Model Mounting BOLT
01 30 K6G3~18B(C) M4 P0.7×50
02 40 K6G20~250B(C) M4 P0.7×60
03 26 K6G10BX M4 P0.7×85
WEIGHT
PART WEIGHT(kg)
MOTOR 0.72
DECIMAL GEARHEAD 0.22
GEARHEAD K6G3~18B(C) 0.26
K6G20~40B(C) 0.33
K6G50~250B(C) 0.36
 
RATED TORQUE OF GEARHEAD
% 50Hz Unit = above : N·m / below : kgf·cm
MODEL SPEED
(rpm)		 500 416 300 250 200 166 150 120 100 83 75 60 50 41 37 30 25 20 16 15 12.5 10 8.3 7.5 6
MOTOR /
GEARHEAD		 Ratio 3 3.6 5 6 7.5 9 10 12.5 15 18 20 25 30 36 40 50 60 75 90 100 120 150 180 200 250
K6I6N
K6GB(C)		 0.11 0.14 0.19 0.23 0.29 0.34 0.38 0.48 0.57 0.69 0.69 0.86 1.03 1.23 1.37 1.54 1.85 2.31 2.78 3 3 3 3 3 3
1.1 1.4 1.9 2.3 2.9 3.4 3.8 4.8 5.7 6.9 6.9 8.6 10.3 12.3 13.7 15.4 18.5 23.1 27.8 30 30 30 30 30 30
 
% 60Hz Unit = above : N·m / below : kgf·cm
MODEL SPEED
(rpm)		 600 500 360 300 240 200 180 144 120 100 90 72 60 50 45 36 30 24 20 18 15 12 10 9 7.2
MOTOR /
GEARHEAD		 Ratio 3 3.6 5 6 7.5 9 10 12.5 15 18 20 25 30 36 40 50 60 75 90 100 120 150 180 200 250
K6I6N
K6GB(C)		 0.1 0.12 0.16 0.19 0.24 0.29 0.32 0.41 0.49 0.58 0.58 0.73 0.87 1.05 1.17 1.31 1.57 1.97 2.36 2.62 3 3 3 3 3
1 1.2 1.6 1.9 2.4 2.9 3.2 4.1 4.9 5.8 5.8 7.3 8.7 10.5 11.7 13.1 15.7 19.7 23.6 26.2 30 30 30 30 30

Gearhead and decimal gearhead are sold separately.
The code in of gearhead model is for gear ratio.
color indicates that the output shaft of the geared motor rotates in the same direction as the output shaft of the motor.
    Others indicate rotation in the opposite direction.
If you are to have less ratio than the ratio in the table, you can install the decimal gearhead, which has one tenth of the ratio, 
    between the gearhead and the motor.in this case, the permissible torque is 3 N·m / 30 kgf·cm
RPM is based on motor's synchronous rpm (50Hz : 1500rpm, 60Hz : 1800rpm) and calculated by dividing gear ratio.
    Actual rpm is 2~20% less than indicating rpm according to load size.

More detail about IMS Mechatronics Sdn Bhd
IMS Mechatronics Sdn Bhd
IMS Mechatronics Sdn Bhd Motion Solutions Johor, Control Components Supplier Malaysia, Motion Devices Johor Bahru (JB) ~ IMS Mechatronics Sdn Bhd
Contact Us flagMalaysia