SPECIFICATIONS |
PC-12 |
Grinding Wheel |
|
Standard grinding range (Dia.) |
Ø1~Ø40 mm |
Capacity increases with special arrangement |
Ø30~Ø60 mm |
Grinding wheel size (O.D. x width x I.D.) |
Ø305 x 150 x Ø120 |
Grinding wheel speed |
1900 R.P.M. |
Grinding wheel motor |
7-1/2 HP x 4P |
Regulating Wheel |
|
Regulating wheel size (O.D. x width x I.D.) |
Ø205 x 150 x Ø90 |
Regulating wheel speed |
20 ~ 337 R.P.M. (10 Steps) |
Regulating wheel motor |
1HP x 6P |
Regulating wheel tilt angle |
+5° ~ -3° |
Regulating wheel swivel angle |
±5° |
Handwheel Graduation |
|
Upper slide feed graduation |
4 mm/rev. 0.025 mm/graduation |
Upper slide micro-feed graduation |
0.1 mm/rev. 0.001 mm/graduation |
Lower slide feed graduation |
7 mm/rev. 0.05 mm/graduation |
Lower slide micro-feed graduation |
0.2 mm/rev. 0.001 mm/graduation |
Trimming device graduation |
1.25 mm/rev. 0.01 mm/graduation |
Drive Motors |
|
Hydraulic pump motor |
1 HP x 4P |
Coolant pump motor |
1/8 HP x 2P |
Machine Dimensions |
|
Machine Dimensions |
1750 x 1050 x 1400 mm |
Net weight |
1650 kgs |
Gross weight |
1900 kgs |