Controllers & Transmitters
BL7917-2 ORP Controller and Pump
BL7917-2 ORP Controller and Pump

 

BL7917-2 ORP Controller and Pump

Hanna Instruments (M) Sdn Bhd flag
分类: Controllers & Transmitters 已售罄
可在官方网站购买
RM 4816.00 欲了解更多详情，请游览我们的官方网站 hannamalaysia.com
游览官方网站 联络我们
详情

The BL7917 combines a ORP meter with a chemical dosing pump in order to maintain a desired set point in process applications.

Easy Installation

  • Designed with mounting holes built into a rugged base, BL7917 is simple to install. All of the controls and pump assemblies are conveniently located on the front of the unit.
  •  

Proportional Dosing

  • A proportional control slows down the stroke rate as the measured value approaches the user selectable set points, avoiding overdosage of chemicals. This feature makes the pump’s dosing more accurate, saves chemicals and eliminates unnecessary and costly corrections to your process, especially with slow reacting chemicals.

Rugged Construction

  • BL7917 is housed in rugged, fiber-reinforced polypropylene IP55 rated casings to protect from hazardous spills and splashes. PVDF, FPM/FKM and PTFE materials are used for all parts that come into contact with liquid to resist corrosion caused by chemicals.

Isolated Recorder Output

  • To enhance troubleshooting and the ability to record data while monitoring, simply attach a recording device to the instrument’s 4 to 20 mA output contacts, conveniently located on the front panel, to obtain a copy of the results on demand.

Simple Pump Action

  • A positive displacement solenoid with few moving parts makes the BL7917 more reliable than motor driven pumps since there is no rotating parts, gears or cams; drastically reducing any chance of mechanical failure.

Auxiliary Dosing Contacts

  • Allows the user to attach a mixer or priming pump that is activated only when the pump is dosing.

ORP

ORP Range -999 mV to +999 mV
ORP Resolution 1 mV
ORP Accuracy ±5 mV

Process Control Meter

Alarm Relay Set Point 1 isolated, 2A, max. 240V, resistive load, 1,000,000 strokes
Dosing Control proportional, oxidizing or reducing, user selectable
Analog Ouput Signal 4-20 mA (isolated)
Dosing Terminals 1 isolated, 2A, max. 240V, resistive load, 1,000,000 strokes
Over Current Protection 250V fuse
Display LCD
Power Supply 230V ±15%; 50/60Hz (40W);
Environment 0 to 50°C (32 to 122°F); RH max 95% non-condensing
IP Rating IP55
Dimensions 221 x 142 x 181 mm (8.7 x 5.6 x 7.1’’)
Weight 5 kg (11 lb.)
Ordering Information BL7917-2 is supplied with 7 m (23') LPDE suction valves, polyethylene discharge tubing, 230V power cable and instructions.




 










 

更多 Hanna Instruments (M) Sdn Bhd 相关资料
Hanna Instruments (M) Sdn Bhd
Hanna Instruments (M) Sdn Bhd Measuring Instruments Selangor, Photometers Supply Penang, Sabah, Test Equipments Supplier Malaysia ~ Hanna Instruments (M) Sdn Bhd
联络我们 flagMalaysia