Our Original Brushless Motor Technology
The brushless motor offers a significantly extended product life cycle by eliminating trouble including armature burnout, layer short or commutator wear even in severe work environments. Besides, no carbon brush replacement is required.
The highly efficient brushless motor and the optimized hammering mechanism achieves the top-class*1 drilling speed (up to 40% faster *2) and demolition performance (up to 4.6kg / 5min.*3).
High-Efficiency Particulate Air filter ensures clean air exhaust.
Brush cap and nozzle seal mounted to minimize the escape of dust.
adjustable up to 85mm
Compatible drill bit
allows easy dust disposal
The dust extractor system's internal motor stops after a delay of several seconds from when the tool's switch is released, so that it can vacuum remaining dust particles in the internal parts.
The dust extractor system included with the DH18DBDL fits on the DH18/36DBL. The one included with the DH18DBML fits on the DH18/36DBQL.
Pic.1: The grip of the handle and the drill bit head are on the same line of action, which makes applying force to the drill easier.
Number of 40mm deep holes drilled into concrete with a ø 8.5 drill bit
When the tool bit is suddenly overburdened during operation, the slip clutch works or the tool's built-in controller stops the motor's output before the entire tool jerks.
can store the hammer with the dust extraction system attached.
allows for fast change between the SDS-plus drill bit holder and the drill chuck holder (DH18DBML only).
Note : Turn the change lever to ''Hammering only'' mode when replacing a tool retainer with another.
The chisel can be rotated in multiple angles with the change lever positioned at 'neutral'.
Long Lifetime, Maintenance-Free
Compact, Lightweight
Top-Class *1 Capabilities
Dust Extractor System
High-Efficiency Particulate Air (HEPA) Filter
Brush Cap
Drilling Depth Stop
Diameter: 4.3-20mm
Effective length: 50-100mm
Detachable Dust Box
Delayed Stop Function
Cross Platform Compatibility
Improved Handling
Pic.2: The grip of the handle is close to the center of gravity for easier handling.
Top-Class Runtime *1
Up to 115 holes per charge with the dust extractor system
Up to 170 holes per charge without the dust extractor system
Reactive Force Control(RFC)
Caution
Depending on operating conditions, the Reactive Force Control function may not work or may not provide the specified performance. Make sure that the workpiece is placed and supported properly, and that the main unit is held firmly during operation.
Convenient Carrying Case
(The side handle has to be detached.)
Quick-Release Tool Retainer
Use the machine only in ''Rotation only'' mode when the drill chuck holder installed.
Multiple Bit-Angle Settings
Built-in cooling system of the UC18YSL3 charger reduces charging time by efficiently cooling both the battery and charger at the same time during charging.
* Included batteries vary by country or area.
CAUTIONNotify the transporting company that a package contains a lithium-ion battery, inform the company of its power output and follow the instructions of the transportation company when arranging transport.
| Model | DH18DBML *2 | ||
|---|---|---|---|
| Capacity | Concrete | 20mm (25/32'') | |
| Bit Shank | SDS-plus | ||
| Battery | Voltage | 18V | |
| Power Output | BSL1860 | 108Wh | |
| BSL1850 | 90Wh | ||
| No Load Speed | 0 - 1,050/min | ||
| Full Load Impact Rate | 0 - 3,950/min | ||
| Overall Length | 526mm (20-45/64'') | ||
| Weight *3 | 5.8kg (12.8lbs.) | ||
|
Vibration Total Values (triax vector sum) *4 |
Hammer drilling into concrete | Vibration emission value ah, HD = 14.5 m/s2 | |
| Uncertainty K = 1.5 m/s2 | |||
| Standard Accessories *5 | Dust Extractor System | ||
| Drill Chuck Holder | |||
| 2 Batteries (BSL1860 or BSL1850), Charger (UC18YFSL or UC18YSL3) | |||
| Side Handle, Depth Gauge, Battery Cover, Carrying Case | |||
Malaysia
