S5700 Series Field Comm Analyzer combines the highest performance operating specifications and multi-functional measurements such as cable and antenna system analysis, fiber inspection, spectrum analysis, cellular signal demodulation, interference analysis, signal coverage mapping and RF/optical power measurements in a single instrument.
| Cable and Antenna Analyzer: 2MHz - 4.4GHz/ 6.0GHz
| Spectrum Analyzer: 9kHz - 4.4GHz/ 6.0GHz
| Test MIMO 4x4 antenna performance
| Return loss, Cable loss, VSWR, DTF, Smith chart, 1-Port phase
| RF, fiber and wireless signal quality testing in a single instrument
| Powerful analysis capabilities of management software
| Detect signal degradation and system performance over time with trace overlay
| Perform traditional RF feedline tests, inspect fiber connectors with auto pass/fail results and measure RF/Optical power
As a multi-functional instrument, the S5700 series can be configured to meet your specific test needs at the time of purchasing or can be upgraded in the future need. Additional option measurement functionality can be added on the fly in the field in a matter of seconds.
Designed specifically for wireless communication field engineers and technicians who is performing installation, maintaining and troubleshooting of the wireless communication sites, the S5700 series was developed to get the job done right with multiple cutting edge features that deliver accurate measurement, improve productivity and reduce OPEX and CAPEX.
|
Model |
S5700 |
S5800L |
S5800E |
S5800H |
|
Spectrum Analyzer |
Yes |
Yes |
Yes |
Yes |
|
Cable and Antenna Analyzer |
Yes |
/ |
/ |
/ |
|
Interference Analyzer (Optional) |
Yes |
Yes |
Yes |
Yes |
|
FDD-LTE Signal Analyzer (Optional) |
Yes |
/ |
Yes |
Yes |
|
TDD-LTE Signal Analyzer (Optional) |
Yes |
/ |
Yes |
Yes |
|
GSM/ CDMA&EVDO/ WCDMA/ TD-SCDMA Signal Analyzer |
Yes |
/ |
Yes |
Yes |
|
Coverage (Optional) |
Yes |
Yes |
Yes |
Yes |
|
OPM & VFL &Wifi & Channel Scanner |
Yes |
/ |
/ |
/ |
| Touch Screen | Yes | / | / | Yes |
1. Cable & Antenna Analyzer
| Model | S5700A | S5700B |
| Frequency | ||
| Frequency Range | 2MHz - 4.4GHz | 2MHz - 6.0GHz |
| Resolution | 1kHz | 1kHz |
| Measurement Speed | ||
| Reflection | < 0.8ms/point | |
| DTF | < 1ms/point | |
| Data Points | 130, 259, 517, 1033, 2065 | |
| Measurement Accuracy | ||
| Corrected Directivity | 42dB (typical, after standard OSL calibration) | |
| 38dB (typical, after E-cal calibration) | ||
| Interference Immunity | ||
| On-channel | +20dBm & >1MHz of carrier frequency | |
| Off-channel | +10dBm within ± 10kHz of carrier frequency | |
| Measurements | ||
| Return Loss | 0 to 60dB (resolution 0.01dB) | |
| Cable Loss | 0 to 30dB (resolution 0.01dB) | |
| VSWR | 1:1 to 65:1 (resolution 0.01) | |
| DTF Range (Distance) | 1500 meters (4921 feet) | |
| Output Power | 0dBm (Nominal) | |
| Connectors | ||
| RF Out | N type, Female, 50Ω | |
| RF Out Damage Level | 25dBm, ±50VDC peak | |
| Impedance | 50Ω | |
2. Spectrum Analyzer
| Model | S5700A | S5700B |
| Frequency | ||
| Frequency Range | 9kHz - 4.4GHz | 9kHz - 6.0GHz |
| Turning Resolution | 1Hz | 1Hz |
| Aging | < ±1.0ppm/yr | |
| Frequency Span |
1kHz to 4GHz in 1-2-5 sequence (automode), and 0Hz (zero span) |
1kHz to 6GHz in 1-2-5 sequence (automode), and 0Hz (zero span) |
| Bandwidth | ||
| Resolution Bandwidth (RBW) | 10Hz to 3MHz in 1-3 sequence (auto or manually selectable) | |
| Video Bandwidth (VBW) | 10Hz to 3MHz in 1-3 sequence (auto or manually selectable) | |
| Spectral Purity (Phase Noise) | ||
| @ 1kHz Offset from Carrier | -90dBc/Hz | |
| @ 10kHz Offset from Carrier | -100dBc/Hz | |
| @ 10kHz Offset from Carrier | -105dBc/Hz | |
| Amplitude | ||
| Dynamic Range | >100dB | |
| Maximum Safe Input Level | +30dBm (peak power, input attenuation >15dB), 50VDC | |
| Amplitude Accuracy | < ±1.0dB | |
| Attenuator Range | 0dB to 55dB in 5dB steps | |
| DANL (Input terminated, RBW = 1Hz, Attn = 0dBm, Avg detector, Typical) | ||
| Preamp Off |
< -144dBm (1MHz - 1GHz) < -138dBm (1GHz - 4GHz) |
|
| Preamp On |
< -158dBm (1MHz - 1GHz)
< -154dBm (1GHz - 4GHz) |
|
3. Optical Measurement
| Model | S5700A | S5700B |
| Optical Power Meter | ||
| Accuracy | ±0.25dB | |
| Dynamic Range | -50dBm to +27dBm | |
| Wavelength | 850/ 980/ 1300/ 1310/ 1490/ 1550/ 1610 nm | |
| Resolution | 0.01 dBm, mW, uW, nW | |
| VFL | ||
| Output Power | 10mW | |
| Adapter | FC/PC | |
4. General Information
| Model | S5700A | S5700B |
| Display | ||
| Type/ Size | Touch Screen, TFT LCD / 8.4 inch (800*600) | |
| Data Storage | ||
| Internal | 1GB, >2000 saved measurement files | |
| External | Limited by size of USB flash drive | |
| Size & Weight | ||
| Size | 258mm * 173mm * 74mm | |
| Weight | 3kg | |
| Battery | ||
| Type | Li-ion, 11.1V, 5200mAh | |
| Operation Time |
>6 hrs, continuous; 8hrs, idle (CA mode) >4 hrs, continuous; 8hrs, idle (SA mode) |
|
See more specifications in the datasheet.
| No. | Item | Qty. |
| 1 | Main Machine | 1 pcs |
| 2 | AC/DC Adapter | 1 pcs |
| 3 | Rechargeable Li-ion Battery | 1 pcs |
| 4 | Vehicle Plug-in Lighter Deveice | 1 pcs |
| 5 | ''Y'' OSL Clibration Device | 1 pcs |
| 6 | 1.5m Test Port Extension Cable | 1 pcs |
| 7 | Soft Carrying Case | 1 pcs |
| 8 | CD (Site Workbench Software and Manual) | 1 pcs |
| Option No. | Item | Description |
| S5700-01 | RF Power Meter (Software) |
Providing true RMS measurements with accurate measurements for both CW and complex digitally modulated signals. |
| S5700-02 | In-line Bi-Directional RF High Power Sensor | 300MHz to 4GHz, 2mW to 150W, N(f), 50Ω |
| S5700-03 | Terminal RF Power Sensor | 1MHz to 6GHz, -30dBm to +20dBm, N(m), 50Ω |
| S5700-04 | Interference Locatiton Analysis |
Add Spectrogram, RSSI, Signal ID, Signal Strength, Interference Location Mapping, Delta Spectrum and DPS measurement applications to the spectrum analyzer. (Need directional log periodic antenna, option 13-17) |
| S5700-05 | Signal Coverage Mapping | Allowing users to map RSSI and ACPR measurements. (Need option S5700-06) |
| S5700-06 | GPS Module (USB) | / |
| S5700-07 | Signal Analysis | LTE, WCDMA, TDSCDMA, GSM, CDMA |
| S5700-08 | GPS Module (Internal Built-in) | / |
| S5700-09 | Optical Power Meter and VFL |
Using for all optical power measurements, such as optical fiber loss measurement and optical device performance evaluation. |
| S5700-10 | 802.11 A/B/G WiFi Module | Internal built-in |
| S5700-11 | 2-Port Transmission Measurement | Providing the capability to perform 2-port measurements. |
| S5700-12 | Channel Scanner | / |
| S5700-13 | Directional Active Log Periodic Antenna | Frequency range: 9kHz to 20MHz |
| S5700-14 | Directional Active Log Periodic Antenna | Frequency range: 20MHz to 200MHz |
| S5700-15 | Directional Active Log Periodic Antenna | Frequency range: 200MHz to 500MHz |
| S5700-16 | Directional Active Log Periodic Antenna | Frequency range: 500MHz to 3GHz |
| S5700-17 | Directional Active Log Periodic Antenna | Frequency range: 500MHz to 8GHz |
| S5700-18 | Antenna Handle with GPS and Electronics Compass | / |
Malaysia
