详情
Thermal Compound
KennTherm 9310
KennTherm 9310 Thermal Compound is a non-silicone grease and metal-free grease with very low thermal impedance and long-term stability. The proprietary- formulated thermal compound with appropriate viscosity and good consistency can be spread easily and evenly. It can be stored in room temperature without special treatment.
KennTherm 9310 serves as an effective thermal interface material for heat sink devices where efficient cooling as well as long-term stability is required.
Features
- Excellent performance
- Excellent long-term stability
- Non-corrosive
- No special requirements forstorage
- Easy to apply and less to use
- No “ burn-in” time required
- Low dry-out
- Not electrically conductive
Specification
|
Properties |
Test Methods |
Units |
Typical value |
|
Color |
|
|
White |
|
Consistency |
ASTM D217 |
|
220 |
|
Specific Gravity |
ASTM D1475 |
g/cm3 |
2.7 |
|
Viscosity |
BrookField CVE #7 @12RPM |
Cps |
300K-500K
|
|
Thermal Properties |
|
|
|
|
Thermal Conductivity |
ASTM D5470 |
W/m-K |
1.8 |
|
Thermal Impedance |
ASTM D 5470 |
K-in2/W |
0.024 |
|
Dry Out Test |
240 hours at 363K |
Weight% |
0.03 |
|
Electrical Properties |
|
|
|
|
Dielectric constant |
298K@1000 Hz |
ASTM D-150 |
|
10.66 |
|
298K@100K Hz |
ASTM D-150 |
7.74 |
|
Dissipation factor |
298K@1000 Hz |
ASTM D-150 |
|
0.25 |
|
298K@100K Hz |
ASTM D-150 |
0.05 |
|
Dielectric Strength |
ASTM D-149 |
kV/mm |
2
|
Contact our Thermal Paste Consultant in area Malaysia (Selangor(Klang, Shah Alam, Subang), Kuala Lumpur(Sungai Buloh), Sepang, Negeri Sembilan, Melaka, Johor(Johor Bharu,Muar,Batu Pahat), Pahang(Temerloh, Kuantan), Kelantan, Terengganu, Perak(Ipoh), Kedah, Perlis, Penang, Sabah, Sarawak), Indonesia, Singapore, Thailand, Philippines, Vietnam, Laos, Myanmar, Cambodia, Brunei at [email protected].
Malaysia
