MEANWELL 100W SINGLE OUTPUT LED POWER SUPPLY - LPC-100 SERIES - LPC-100-700

• LPC-100-700

• Constant current design
• Universal AC input/full rauge
• Withstand 300VAC surge input for 5 seconds
• High efficiency up to 90%
• Protections: Short circuit / Over voltage
• Cooling by free air convection
• Fully encapsulated with IP67 level 
• Fully isolated plastic case
• Class II power unit, no FG
• 100% full load burn-in test
• Low cost, high reliabaility
• 2 years warranty 

• Suitable for LED related fixture or appliance (such as LED Decoration or Advertisement devices)

• LPC-100 series is one 100W single output AC/DC LED switching power supple. It features the constant current design, providing various models with the output current ranging from 350mA through 2100mA the LED lighting applications employ the most frequently.
• LPC-100 operates for the range 90~264VAC so it can perfectly work for most of the countries in the world. The whole series is based on class II (without FG pin) design, housed with a 94V-0 flame retardant plastic case. With the working efficiency up to 90%, LPC-100 can work at the ambient temperature between -25°C~+50°C under air convection.

• Model : LPC-100-700

• Rated current : 700mA
• Current accuracy : ±5.0%
• Constant current region : 72 ~ 143V
• Rated power : 100.1W
• Ripple current : ±5%
• Ripple & noise : 1Vp-p
• Line regulation : ±1%
• Voltage tolerance : ±1.5%
• Setup, Rise time : 1000ms, 80ms / 230VAC 2000ms,80ms/115VAC at full load
• Hold up time : 16ms/230VAC 10ms/115vac at full load

• Voltage range : 90 ~ 264VAC 127VDC ~ 370VDC
• Frequency range : 47 ~ 63Hz
• EFFICIENCY (Typ.) : 90%
• AC current : 12V : 2.2 A / 115VAC 1.2A / 230VAC
• Inrush current : COLD START 35A(twidth=1800 s measured at 50% Ipeak) at 230VAC; Per NEMA 410
• Max. No. of PSUs on 16A circuit breaker : 1 units (circuit breaker of type B) / 2 units (circuit breaker of type C) at 230VAC
• Leakage current : <0.25mA / 240VAC

• Short circuit : Hiccup mode, recovers automatically after fault condition is removed
• Over voltage : 160 ~ 172V / Protection type : Shut down and latch off o/p voltage re-power on to recovery

• Working temp. : -25 ~ +50℃ (Refer to ''Derating Curve'')
• Working humidity : 10 ~ 95% RH non-condensing
• Storage temp. humidity : -40 ~ +80℃, 10 ~ 95% RH
• Temp. coefficient : ±0.03%/℃ (0 ~ 50℃)
• Vibration : 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes

• Safety standards :  IEC/EN 62368-1;EAC TP TC 004, IP67 approved,
• Withstand voltage : I/P-O/P:3KVAC
• Isolation resistance : I/P-O/P:100M Ohms / 500VDC / 25℃/ 70% RH
• EMC emission : Compliance to EN55032(CISPR32) Class B; EN61000-3-2 Class A(≦80% load); EN61000-3-3, EAC TP TC 020
• EMC immunity : Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, light industry level , criteria A, EAC TP TC 020

• MTBF : 511Khrs min. MIL-HDBK-217F (25℃)
• Dimension : 190*52*37mm (L*W*H)
• Packing : 0.61Kg;20pcs/13.2Kg/0.55CUFT