OSRAM ELEMENT 38/220-240/950 G3

• 38/220-240/950 G3

• Fixed output (no dimming)
• Input voltage: 220 - 240 VAC
• Suitble for Class I/II luminaires
• Output current range 150-1050 mA
• Up to 30000 h lifetime at tcmax = 80°C
• Typ. Efficiency: from 82% to 90% depend on different wattage
• SELV
• Ambient temp range, ta: -20°C to +50°C

• Safety ensured by OSRAM (SELV)
• 3 years guarantee
• High quality of light with ripple current < 5%

• Spot light and down light
• Panels
• Other indoor LED luminaires

• Nominal voltage : 220…240 V
• Mains frequency : 50…60 Hz
• Input voltage AC : 198...264  V
• Total harmonic distortion : < 20 %
• Power factor : 0.96
• Efficiency in full-load : 89 %
• Device power loss : 4.7W
• Protective conductor current : <0.7 mA
• Inrush current L : < 11 A
• Max. ECG no. on circuit breaker 10 A (B) : 21
• Max. ECG no. on circuit breaker 10 A (C) : 31
• Max. ECG no. on circuit breaker 16 A (B) : 33
• Max. ECG no. on circuit breaker 16 A (C) : 50
• Max. ECG no. on circuit breaker 25 A (B) : 52
• Surge capability (L/N-Ground) : 2 kV
• Surge capability (L-N) : 1 kV
• Nominal output voltage : 21…40 V
• U-OUT (working voltage) : 60 V
• Nominal output current : 750 mA
• Output current tolerance : ±7.5 %
• Output ripple current (100 Hz) : < 5 %
• Output PSTLM : ≤1
• Output SVM : ≤0.4
• Nominal output power : 20…38 W
• Maximum output power : 38 W
• Galvanic isolation : SELV
• Input voltage DC: -
• Galvanic isolation primary/secondary : SELV
• Current set : Fixed current
• Mounting hole spacing, length : 94.0 mm
• Mounting hole spacing, width : 34.7 mm
• Product weight : 66.60 g
• Cable cross-section, input side : 0.5…1.5 / 0.75…1.5 mm² 
• Cable cross-section, output side : 0.5…1.5 / 0.75…1.5 mm² 
• Wire preparation length, input side : 7…8 mm
• Wire preparation length, output side : 7…8 mm
• Length : 103.0 mm
• Width : 43.0 mm
• Height : 29.0 mm

• Ambient temperature range : -20…+50 °C
• Maximum temperature at tc test point : 80 °C
• Max.housing temperature in case of fault : 110 °C
• Temperature range at storage : -40…+85 °C
• Permitted rel. humidity during operation : 5…85 % 

• ECG lifetime : 30000 h / 50000h

• Dimmable : No
• Overheating protection : No
• Overload protection : Automatic reversible
• Short-circuit protection : Automatic reversible
• No-load proof : Automatic reversible
• Intended for no-load operation : No
• Max. cable length to lamp/LED module : 2.0 m 
• Suitable for fixtures with prot. class : I / II
• Type of connection, input side : Push terminal
• Type of connection, output side : Push terminal
• Suitable for through-wiring : No
• Number of channels : 1

• Approval marks – approval : CE / CCC / RCM / ENEC 25 
• Standards : Acc. to IEC 61347-1/Acc. to IEC 61347-2-13/Acc. to IEC 62384/Acc. to IEC 61000-3-2/Acc. to IEC 61547/Acc. to IEC 61000-3-3
• Type of protection : IP20
• Protection class : I,II