High performance Wi-Fi 6 (802.11ax) for outdoor environments
Weatherproof and temperature hardened, HPE Aruba Networking 570 Series access points deliver the highest Wi-Fi 6 performance in outdoor and environmentally challenging locations. The high-performance and high power 570 Series APs deliver maximum capacity and range. It delivers 4x4:4SS MU-MIMO capability, HPE Aruba Networking’s advanced ClientMatch and integrated Bluetooth to enable HPE Aruba Networking location services.
Purpose-built to survive in the harshest outdoor environments, 570 Series APs withstand exposure to extreme high and low temperatures, persistent moisture and precipitation, and are fully sealed to keep out airborne contaminants. All electrical interfaces include industrial strength surge protection.
HPE Aruba Networking Wi-Fi 6 access points provide high-performance connectivity in dense mobile and IoT environments. With maximum aggregate on air data rates of 3 Gbps (HE80/HE40), the 570 Series APs deliver the speed and reliability needed for demanding environments.
Incredible efficiency The 570 Series APs are designed to optimize user experience by maximizing Wi-Fi efficiency and dramatically reducing airtime contention between clients. Features include Uplink and Downlink Orthogonal Frequency Division Multiple Access (OFDMA), Downlink Multi-User MIMO (MU-MIMO) and cellular co-location. With up to 4 spatial stream and 160 MHz channel capability, the 570 Series provides groundbreaking wireless capabilities for any application.
Advantages of OFDMA This capability allows HPE Aruba Networking Wi-Fi 6 APs to handle multiple Wi-Fi 6 enabled clients simultaneously on a single radio. Channel utilization is optimized per transaction by matching allocated bandwidth in a channel to the offered user load. These subdivisions of the channel are referred to as Resource Units (RU).
Multi-user MIMO (MU-MIMO) The 570 Series APs support downlink MU-MIMO similar to Wi-Fi 5 (802.11ac Wave 2) APs. With the introduction OFDMA in Wi-Fi 6, the overhead for this capability is reduced and MU-MIMO effectiveness is substantially improved for large client counts.
Wi-Fi 6 and MU-MIMO aware client optimization HPE Aruba Networking’s patented AI powered ClientMatch technology ensures that all clients are attached to their best serving Access Point. Session metrics, network metrics, applications and client type are used to identify and maintain the best connection.
Advanced Cellular Coexistence (ACC) The ACC feature uses built in filtering to automatically minimize the impact of interference of high power cellular base stations, in building distributed antenna systems as well as small cell and femtocell equipment.
Intelligent Power Monitoring (IPM) HPE Aruba Networking APs continuously monitor and report hardware energy consumption. APs can be configured to enable or disable capabilities based on the available PoE power—ideal when wired switches have exhausted their power budget.
IOT platform capabilities HPE Aruba Networking Wi-Fi 6 APs include an integrated Bluetooth 5 and 802.15.4 radio (for Zigbee support) to simplify deploying and managing IoT-based location services, asset tracking services, security solutions and IoT sensors. This allows organizations to leverage the 570 Series as an IoT platform, which eliminates the need for an overlay infrastructure and additional IT resources.
Target Wake Time (TWT) Ideal for IoT solutions that communicate infrequently, this Wi-Fi 6 capability allows IoT devices to use 802.11ax protocol. TWT coordinates with client devices to allow them to sleep for extended periods and use shorter wake times to communicate before returning to sleep. This substantially extends the useful operating life of Wi-Fi 6 based battery powered sensors.
HPE Aruba Networking secure infrastructure The HPE Aruba Networking 570 Series is an integral part of HPE Aruba Networking’s Zero Trust security approach to help protect user authentication and wireless traffic. Select capabilities include:
WPA3 and Enhanced Open With the introduction of WPA3 and Enhanced Open, a Wi-Fi 6 certified client will never send unencrypted traffic over the air. Even with an open authenticated network, Enhanced Open still provides strong encryption over the air. In all Wi-Fi 6 user sessions, each user is uniquely encrypted and if they disconnect and reconnect, the encryption changes from session to session.
WPA2-MPSK MPSK enables simpler passkey management for WPA2 devices—should the Wi-Fi password on one device change, no additional changes are needed for other devices. This feature is enabled when networks are deployed with ClearPass Policy Manager.
VPN tunnels In Remote AP (RAP) and IAP-VPN deployments, the 570 Series can be used to establish a secure SSL/IPSec VPN tunnel to a Gateway or Mobility Controller that is configured as a VPN concentrator.
Trusted Platform Module (TPM) For enhanced device assurance, all PE Aruba Networking APs have an installed TPM for secure storage of credentials and keys, and boot code.
Simple and secure access To simplify policy enforcement, the HPE Aruba Networking 570 Series uses HPE Aruba Networking’s Policy Enforcement Firewall (PEF) to encapsulate all traffic from the AP to the Mobility Controller (gateway) for end-to-end encryption and inspection. Policies are applied based on context including user role, device type, application, and location. This reduces the manual configuration of SSIDs, VLANs, and ACLs. PEF also serves as the underlying technology for HPE Aruba Networking Dynamic Segmentation.
High density connectivity Each 570 Series AP provide connectivity for a maximum of 512 associated clients per radio (1024 total).
Flexible operation and management A unique feature of HPE Aruba Networking APs is the ability to operate in either controller-less or controller-based mode.
Controller-less (instant) mode In controllerless mode, one AP serves as a virtual controller for the entire network. Learn more about Instant mode in this technology brief.
Mobility controller mode For optimized network performance, roaming and security, APs tunnel all traffic to a mobility controller for centrally managed traffic forwarding and segmentation, data encryption, and policy enforcement. Learn more in the HPE Aruba Networking Operating System data sheet.
Management options Available management choices include HPE Aruba Networking Central (cloud-based) or HPE Aruba Networking AirWave (multi-vendor, on prem) solutions. For large installations across multiple sites, HPE Aruba Networking APs can be shipped and activated with Zero Touch Provisioning through Central or AirWave. This reduces deployment time, centralizes configuration, and provides inventory visibility.
Additional Wi-Fi features
Transmit Beamforming (TxBF): Increased signal reliability and range
Passpoint Release 2: Seamless cellular-to-Wi-Fi carryover for guests
Dynamic Frequency Selection (DFS): Optimized use of available
RF spectrum Maximal Ratio Combining (MRC): Improved receiver performance for multi antenna access points
Cyclic Delay/Shift Diversity (CDD/CSD): Enable use of multiple transmit antennas
Low-Density Parity Check (LDPC): High performance error detection and correction coding for enhanced receiver performance
AP-570 Series specifications
Hardware variants
AP-574
–5 GHz: Four Nf connectors for external antenna operation
–2.4 GHz Two Nf connectors for external antenna operation
–BLE/Zigbee: Integrated omnidirectional antenna and peak gain of 4.2dBi
AP-575
–Built in Omni Directional Antennas
–5 GHz Antennas 5dBi
–2.4GHz Antennas 3.4dBi
–BLE/Zigbee: Integrated omnidirectional antenna and the peak gain of 6dBi
AP-577
–Built in 90°H x 90°V Directional Antennas
–5 GHz Antennas 5.6dBi
–2.4 GHz Antennas 6.8dBi
–BLE/Zigbee: Integrated omnidirectional antennas with peak gain of 8.4dBi
Wi-Fi radio specifications
AP type: Outdoor Hardened, Wi-Fi 6 dual radio, 5 GHz 4x4 MIMO and 2.4 GHz 2x2 MIMO
Software-configurable dual radio supports 5 GHz (Radio 0) and 2.4 GHz (Radio 1) 5 GHz.
Four spatial stream Single User (SU) MIMO for up to 4.8 Gbps wireless data rate to individual 4SS HE160 Wi-Fi 6 client device (max)
Two spatial stream Single User (SU) MIMO for up to 1.2 Gbps wireless data rate to individual 2SS HE80 Wi-Fi 6 client device (typical)
Four spatial stream Multi User (MU) MIMO for up to 4.8 Gbps wireless data rate to up to four 1SS or two 2SS HE160 Wi-Fi 6 DL-MU-MIMO capable client devices simultaneously (max)
Four spatial stream Multi User (MU) MIMO for up to 2.4 Gbps wireless data rate to up to four 1SS or two 2SS HE80 Wi-Fi 6 DL-MU-MIMO capable client devices simultaneously (typical) 2.4 GHz
Two spatial stream Single User (SU) MIMO for up to 575 Mbps wireless data rate to individual 2SS HE40 Wi-Fi 6 client device (max)
Two spatial stream Single User (SU) MIMO for up to 287 Mbps wireless data rate to individual 2SS HE20 Wi-Fi 6 client device (typical)
Support for up to 512 associated client devices per radio, and up to 16 BSSIDs per radio
Supported frequency bands (country-specific restrictions apply):
2.400 to 2.4835 GHz (ISM)
5.150 to 5.250 GHz (U-NII-1)
5.250 to 5.350 GHz (U-NII-2A)
5.470 to 5.725 GHz (U-NII-2C)
5.725 to 5.850 GHz (U-NII-3/ISM)
5.850 to 5.875 GHz (U-NII-4)
Available channels: Dependent on configured regulatory domain
Dynamic frequency selection (DFS) optimizes the use of available RF spectrum.
iPlanet Solution Sdn BhdIT Solution and Service Provider Malaysia, Endpoint Security Malaysia, Cloud Managed Access Point Penang ~ iPlanet Solution Sdn Bhd
Malaysia
