PCE-COG 10 CO/CO2 Meter | PCE Instruments by Muser

PCE-COG 10 CO/CO2 Meter | PCE Instruments by Muser

分类: Indoor Air Quality 当前有货
可在官方网站购买
欲了解更多详情,请游览我们的官方网站 muser.com.my

详情

PCE Instruments PCE-COG 10 CO/CO2 Meter
 
 
Features
 
 
Description
 
The carbon monoxide meter has a measuring range of 0 ... 1000 ppm. In addition to the carbon monoxide measurement, the air quality detector also has a carbon dioxide (CO2) sensor with a measuring range of 0 ... 9999 ppm and a temperature and humidity sensor. The air quality detector already covers a large range of measuring tasks. The air quality detector is therefore used, for example, in occupational safety to check the climatic conditions in office workplaces.

During the measurement, the readings are stored on the carbon monoxide meter. Up to 5000 measuring points can be saved on the air quality detector. The CO² and CO content, as well as the temperature and humidity are saved by the air quality detector for each storage point. After a measurement run, the stored measurement values can be viewed directly on the air quality detector.

For further processing, the readings recorded by the carbon monoxide meter can be transferred to a computer. The transfer takes place via the Micro-USB interface of the air quality detector. When connecting the CO and CO² meter to a computer, it is recognized as a mass data storage device. The saved measured values are saved by the air quality detector in CSV file format and can therefore be processed directly.

The built-in 1500 mAh battery in the carbon monoxide meter enables mobile use. To charge the battery, the air quality detector can be connected to a 5 VDC power supply via the micro-USB interface. The air quality detector can continue to be used during the charging process to take measurements. For an optimal and longer-lasting measurement of the air quality detector there is a 1/4 inch connection on the back. With this connection, the air quality detector can be attached to a tripod and aligned.
 
 
Technical Specifications
 

Carbon monoxide (CO)
Measuring range* 0 … 1000 ppm
Resolution 1 ppm
Accuracy ±5 % of measuring range
*The CO measurement refers to an ambient condition of 0 … 40 °C / 32 … 104 °F, 15 … 95 % RH, non-condensing.
   
Carbon dioxide (CO²)
Measuring range* 0 … 9999 ppm
Resolution 1 ppm
Accuracy ±3 % of measured value ± 75 ppm
*The CO² measurement refers to an ambient condition of 0 … 50 °C / 32 … 122 °F, 0 … 85 % RH, non-condensing.
   
Temperature  
Measuring range 0 … 50 °C, 32 … 122 °F
Resolution 0.1 °C / °F
Accuracy ±2 °C / ±4 °F
   
Humidity  
Measuring range 0 … 100 % RH
Resolution 0.1 % RH
Accuracy
 
 
±5 % between 0 … 20 % RH
±3.5 % between 20 … 80 % RH
±5 % between 80 … 100 % RH
The humidity is based on a wind speed of 1 m/s.
The accuracy is maintained after 30 minutes of acclimatization.
   
Further specifications  
Display 2'' LC display
Measuring rate 1 Hz
Memory for 5000 measuring points
Storage rate 1 minute, 15 minutes, 1 hour
Units temperature: °C, °F, CO / CO²: ppm
Alarm when limit values are exceeded      visually and acoustically
Data export CSV
Connection 1/4“ tripod connection
Interface Micro-USB for charging the battery and for data transmission.
Power supply (battery) 3.7 V, 1500 mAh
Power supply (power adapter) primary: 100 … 240 VAC, 50 / 60 Hz, 0.25 A
secondary: 5 VDC, 1 A
Operating conditions 0 … 45 °C, 32 … 113 °F, <95 % RH, non-condensing
Storage conditions -10 … 55 °C, 14 … 131 °F, <95 % RH, non-condensing
Dimensions 54 x 215 x 34 mm / 2.1 x 8.4 x 1.3''
Weight 154 g / 5.4 oz
 
 
Delivery Scope
 
 
Downloads

 
 

更多 Muser Apac Sdn Bhd 相关资料
Muser Apac Sdn Bhd
Muser Apac Sdn Bhd Testing Instruments Supplier Kuala Lumpur (KL), Malaysia, Monitoring Mapping Systems Supply Selangor, Measuring Equipments Supplies ~ Muser Apac Sdn Bhd