Dual coil technology ensures more accurate measurements
Probe with orientation sensor for error-free measurement at all angles
Multiple measurement materials can be switched
The LS252DL is an all-in-one hardness tester that measures hardness according to the Leeb hardness measurement principle and can be used for hardness measurements on a wide range of metals. The instrument uses impact device DL and is suitable for testing in grooves or on gears where space is tight. It uses advanced dual coil technology for good repeatability and high accuracy. The probe with orientation sensor compensates for measurement errors in different impact directions automatically. The system has various hardness scales, which can be interchanged between Richter (HL), Vickers (HV), Brinell (HB), Shore (HS), Rockwell (HRA), Rockwell (HRB) and Rockwell (HRC) to avoid tedious manual calculations.
The instrument uses the impact device DL with a wide choice of built-in metal materials to suit the needs of different metal hardness tests.
| Parameters | values |
|---|---|
| Probe | Impact device DL |
| Hardness Scales | HL, HV, HB, HS, HRA, HRB, HRC |
| Measurement Range | HLD: (170-960); HV(194-976); HB(188-651); HRC(17.6-68.5); HS(29.54-99.5); HRB(91.5-100); HRA(60-85.8) |
| Resolution | 1HL |
| Accuracy | ±12 HL, ±6 HL typical |
| Repeatability | 6HL (factory standard) |
| Display | 128 * 64 dot matrix OLED |
| Power Supply | Rechargeable lithium battery 3.7V@250mAh, full charge for over 5000 continuous measurements |
| Charging Port | USB(Type-C) |
| Size | 203*34*24 mm |
| Weight | 78g |
| Working Temperature Range | -10~50℃，0~85%RH（no condensation） |
| Storage Temperature Range | -10~60℃，0~85%RH（no condensation） |
It is suitable for testing the hardness of metals in tight spaces such as recesses
The technology brings the tester extraordinary measurement accuracy and good repeatability
The instrument can measure at any angles. Featuring a built-in direction sensor, the probe can automatically compensate the measurement errors in different impact directions. Multi-angle measurement is easy
Impact device DL is partly made of Tungsten carbide, and its hardness is almost equal to the diamond
LS252DL hardness tester provides a variety of hardness scales, which can be converted between Leeb (HL), Vickers (HV), Brinell (HB), Shore (HS) and Rockwell (HRA/HRB/HRC)
With 10 metal materials choices, including steel, alloy tool steel, stainless steel and grey cast iron, the instrument can be used in a wide range of applications and industries to meet the demands of everyday work
Using rechargeable lithium battery, the battery can be charged simply from USB port
The instrument uses a dynamic hibernation algorithm to greatly extend the standby time and is equipped with a large-capacity lithium battery for long-lasting operation
Users can calibrate the standard parts to eliminate the error
The hardness tester conforms to the following standards:
Loading: Push down the loading sleeve of the probe to lock the impact body.
Positioning: Press the probe firmly against the surface of the object to be measured and keep it still.
Measurement: Press the release button on the top of the probe to measure the hardness of the object.
Cautious
When measuring, the distance between any two indentations should not be less than 3mm, and the distance between the center of the indentation and the edge of the object to be measured should not be less than 5mm.
After use, the impact body should be loosened.
The use of various lubricants is strictly prohibited in the impact device.
Malaysia
