Lab Gruppen Power Amplifier FP10000Q

Lab Gruppen Power Amplifier FP10000Q

分类: Lab Gruppen Power Amplifier 当前有货
欲了解更多详情,请游览我们的官方网站 karaokestore.com.my

详情

OUR BIGGEST SELLING TOURING-GRADE AMPLIFIER, DELIVERING ROCK-SOLID RELIABILITY AND SONIC PURITY

Overview Image

TECH SPEC OVERVIEW

  • Very high power and channel density – The four-channel FP10000Q delivers a total of 10000 W (4 x 2500 W @ 2 ohms) in only 2U 
  • Four-channel flexibility – Adjacent channels bridgeable for 2- or 3-channel operation
  • Lab.gruppen sound quality – impeccable sonic performance standards with durability and greater efficiency
  • NomadLink® network ready – Monitoring and control of key functions accessible via the intuitive DeviceControl software 
  • Patented Class TD amplifier topology – Road-proven output stage delivers Class B audio quality with Class D efficiency 
  • Regulated Switch Mode Power Supply (R.SMPS) – Output power remains constant even with significant drops in the mains voltage
  • Efficient cooling system - Unique, lightweight Intercoller copper cooling system dissipates more heat to allow extended peak output
  • Adjustable parameters - Selectable Gain, scalable Voltage Peak Limiter (VPL), and bridge-mode operation allow custom configuration for any application
  • Comprehensive protection and warning – Excessive output current, DC, high temperature, very high frequency (VHF), short circuit, open load, mains fuse protection, and soft start
  • XLR input connectors
  • Heavy-duty binding post or Speakon output connectors



TECH SPEC

Model FP 10000Q
General
Number of amplifier channels 4
Peak total output all channels driven 10000 W
Peak output voltage per channel 150 V
Max output current per channel 50 A peak
Max output power (all channels driven)
2 ohms 2500 W
4 ohms 2100 W
8 ohms 1300 W
16 ohms 660 W
Max output power bridged
2 ohms Not recommended 1
4 ohms 5000 W
8 ohms 4200 W
16 ohms 2600 W
Performance
THD 20 Hz - 20 kHz at 1 W <0.1%
THD at 1 kHz and 1 dB below clipping <0.05%
Signal to Noise Ratio >112 dBA
Channel separation (Crosstalk) at 1 kHz >70 dB
Input impedance 20 kOhm
Common Mode Rejection (CMR) >54 dB, 20 Hz - 20 kHz
Gain, Sensitivity and Limiters
VPL, selectable per ch 150, 121, 101, 83, 70, 56, 47, 38 V
VPL, when bridged 2 300, 242, 202, 166, 140, 112, 94, 76 V
Voltage Peak Limiter mode (per ch.) Hard / Soft
Amplifier gain selectable (all channels) – rear-panel switches 2 23, 26, 29, 32, 35, 38, 41, 44 dB
Default gain 35 dB
Level adjustment (per channel) Front-panel potentiometer, 31 position detented from -inf to
Connectors and Buttons
Output connectors (per ch.) Neutrik speakON
Input connectors (per ch.) 3-pin XLR, electronically balanced
Output bridge mode A+B - Ch. A is signal input source. A+B, C+D - Ch.’s A and C are input source
NomadLink network On board, 2 x RJ45 connectors IN and OUT
Intelligent fans (on/off) Yes, depending on presence of output signal
Power on/off and Remote enable on/off Individual switches on front-panel
Cooling Dual fan, front to rear airflow, no filter required, temperature controlled speed
Front-panel user interface
Common NomadLink Network; Power Average Limiter (PAL)4; Power on
Per channel Signal present / High-impedance; -10 dB and -4 dB output signal;Voltage Peak Limiter (VPL); Current Peak Limiter (CPL): Very High Frequency (VHF); High temperature; Fault; Mute
Power
Operating voltage, 230 V / 115 V nominal 3 130-265 V / 65 -135 V
Minimum power-up voltage, 230 V / 115 V 171 V / 85 V
Power Average Limiter (PAL) 4 Yes
Soft-start / Inrush Current Draw Yes / max. 5 A
Mains connector 230 V CE: 16 A, CEE7; 115 V ETL: 30 A Twist lock
Dimensions
Dimensions W: 483 mm (19”), H: 88 mm (2 U), D: 396 mm (15.6”)
Weight
Weight 12 kg (26.4 lbs)
Finish
Finish Black painted steel chassis with black painted steel / aluminum front


 

更多 Karaoke Store 相关资料
Karaoke Store
Karaoke Store Karaoke System Supplier Johor Bahru (JB), Malaysia, Karaoke Machines & Equipment Supply Penang, Selangor, KL ~ Karaoke Store