Product Details:
| Outline | EMX212S | EMX312SC | EMX512SC | |
| Mixing capability | Mixing channels | 4 Mono + 4 Stereo +Return | 4 Mono + 4 Stereo | 4 Mono + 4 Stereo +Return |
| AUX | 1 (Effect Send) | 1 (Effect Send) | 1 (Effect Send) | |
| MAIN | Stereo | Stereo | Stereo | |
| Input channel functions | CH1-4 Compressor; 3-band PEQ; CH5-8: 3-band PEQ | CH1-4 Compressor; 3-band PEQ; CH5-8: 3-band PEQ | CH1-4 Compressor; 3-band PEQ; CH5-8: 3-band PEQ | |
| On-board processors | SPX, 2x 7-band GEQ, YS Processing | SPX, 2x 7-band GEQ, YS Processing | SPX, 2x 7-band GEQ, YS Processing | |
| I/O | Mic inputs | 8 | 8 | 8 |
| Phantom power | +15V DC; ON/OFF | +15V DC; ON/OFF | +15V DC; ON/OFF | |
| Line inputs | 4x Stereo | 4x Stereo | 4x Stereo | |
| Control and others | Foot switch, Stand By (All mute) | Foot switch, Stand By (All mute) | Foot switch, Stand By (All mute) | |
| On-board amplifiers | Maximum output power @4ohms | 220W/ch | 300W/ch | 500W/ch |
| Maximum output power @8ohms | 120W/ch (100V model), 130W/ch (120V model), 130W/ch (220-240V model) | 190W/ch (100V model), 190W/ch (120V model), 180W/ch (220-240V model) | 370W/ch (100V model), 350W/ch (120V model), 320W/ch (220-240V model) | |
| Output selection | L/R, L+R/Monitor | L/R, L+R/Monitor | L/R, L+R/Monitor | |
| Maximum Output Power @ 0.5 % THD at 1 kHz | 500 W/4 Ω; 350 W/8 Ω |
| Frequency Response | -3, 0, 1 dB 20 Hz-20 kHz, ref to the nominal output level @ 1 kHz |
| Total Harmonic Distortion | Less than 0.5 % (THD+N) +14 dB @ 20 Hz, 1 kHz, 20 kHz, GAIN control: all nominal |
| Hum & Noise | Equivalent Input Noise, -115 dBu, Rs = 150 Ω CH 1-4 MIC/LINE: MIC |
| Crosstalk | -65 dB @ 1 kHz |
| Input Connectors | CH 1-4: XLR and Phone; CH 5/6, 7/8: XLR and Phone; CH 9/10, 11/12: XLR and Pin |
| CH EQ | HIGH, MID, LOW |
| Phantom Power | 15 V |
| Graphic Equalizer | 7 Band (125, 250, 500, 1 k, 2 k, 4 k, 8 kHz): Main (Stereo) and Monitor |
| Digital Effects | SPX Digital Multi Effector (24 bit AD/DA, 32 bit Internal Processing): 16 Programs |
| Power Amp Mode | Main L/R, Main (L+R)/Monitor |
| Foot Switch | On/Off |
| Dimensions (W x D x H) | 442 x 274 x 286 mm (17-3/8'' x 10-3/4'' x 11-1/4'') |
| Weight | 10 kg (22 lbs.) |
| Power Requirements | 120 V 60 Hz |
| Power Consumption | 450 W |
| Input Terminals | MIC/LINE | Actual Load Impedance | For Use With Nominal | Input level | |||
| Sensitivity *2 | Position | Max. before clip | |||||
| CH INPUT 1-4 |
XLR *3 |
MIC | 2 kΩ | 50-600 Ω Mics |
-60 dBu (0.69 mV) |
-35 dBu (13.8 mV) |
-15 dBu (138 mV) |
| LINE |
-30 dBu (21.8 mV) |
-5 dBu (436 mV) |
+15 dBu (4.36 V) |
||||
|
Phone *4 |
MIC | 6 KΩ | 600 Ω |
-50 dBu (2.18 mV) |
-25 dBu (43.6 mV) |
-5 dBu (436 mV) |
|
| LINE |
-20 dBu (69.0 mV) |
+5 dBu (1.38 V) |
+25 dBu (13.8 V) |
||||
| CH INPUT 5/6, 7/8 |
XLR *3 |
- | 2 kΩ | 50-600 Ω Mics |
-60 dBu (0.69 mV) |
-35 dBu (13.8 mV) |
-15 dBu (138 mV) |
|
Phone *5 |
- | 10 KΩ | 600 Ω Lines |
-20 dBu (69.0 mV) |
+5 dBu (1.38 V) |
+25 dBu (13.8 V) |
|
| CH INPUT 9/10, 11/12 |
XLR *3 |
- | 2 kΩ | 50-600 Ω Mics |
-60 dBu (0.69 mV) |
-35 dBu (13.8 mV) |
-15 dBu (138 mV) |
|
RCA Pin |
- | 10 KΩ | 600 Ω Lines |
-20 dBu (69.0 mV) |
+5 dBu (1.38 V) |
+25 dBu (13.8 V) |
|
| Output Terminals | Actual Source Impedance | For Use With Nominal | Output level | Connector | ||
| Nominal | Max. before clip | |||||
| SPEAKER OUT | 0.1 Ω | 4 Ω Speakers | EMX512SC | 125 W | 500 W | [A1, B1] SPEAKON |
| [A1, A2, B1, B2] | EMX312SC | 75 W | 300 W | [A2, B2] Phone Jack *2 | ||
| EMX212S | 50 W | 200 W | ||||
| MAIN OUT [L, R] | 600 Ω | 10 kΩ Lines | - | +4 dBu (1.23 V) | +20 dBu (7.75 V) | Phone Jack *2 |
| EFFECT OUT | 600 Ω | 10 kΩ Lines | - | +4 dBu (1.23 V) | +20 dBu (7.75 V) | Phone Jack *2 |
| MONITOR OUT | 600 Ω | 10 kΩ Lines | - | +4 dBu (1.23 V) | +20 dBu (7.75 V) | Phone Jack *2 |
| REC OUT [L, R] | 600 Ω | 10 kΩ Lines | - | -10 dBV (316 mV) | +10 dBV (3.16 V) | RCA Pin Jack |
.jpg)
Malaysia
