- Although the type is large, by adopting a dedicated compressor for each model, the compressing efficiency is drastically improved.
- The efficiency is enhanced by 20% with full load, by our comparison.
- The AUCS unloader is installed as a standard component in order to drastically reduce the use of electricity.
- Low noise and low vibration realized by the Z-screw balancing design.
- Optimum for the multiple control in large-scale factories.
| Items | Unit | Details | |
| Power frequency | Hz |
50 (ZU1005WS2) 60 (ZU1006WS2) |
|
| Power supply voltage | V |
380 / 400 / 415 (ZU1005WS2) 380 / 400 / 440 (ZU1006WS2) |
|
| Free air delivery (0.7MPa) | m3/min |
19.0 (ZU1005WS2) 18.2 (ZU1006WS2) |
|
| Delivered air pressure | MPa | 0.7 | |
| Pressure control method | - | Saving energy A.U.C.S & auto. Start & stop selection | |
| Intake air pressure & temperature | - | Atmospheric pressure (2 to 40°C) | |
| Discharge air temp. | °C | Less than cooling water intake temp., + 15°C | |
| Main motor power | kW | 100 | |
| Motor type | - | Three-phase-squirrel-cage, 2P totally enclosed external fan (IE3 Motor) | |
| Starter | - | Automatic star-delta | |
| Drive system | - | Direct coupled motor | |
| Cooling system | - | Water cooled | |
| Fan motor power | kW |
0.08 (ZU1005WS2) 0.12 (ZU1006WS2) |
|
| Lubrication water amount |
 |
130 | |
| Cooling water amount |
/min |
130 | |
| Dryer | Air dew point at outlet | °C | - |
| Refrigerant | kW | - | |
| Discharge pipe diameter | - | 3flange | |
| Dimension,L×W×H (body) | mm | - | |
| Total mass(dry state) | kg | 2350 | |
| Noise level [OP1.5m] | dB·A | 74 | |
| Dimension,L×W×H (body)[without dryer] | mm | 2860 × 1350 × 1750 | |
Lihat detail lebih lanjut tentang Sejati Teknik Sdn Bhd
Malaysia
