Deskripsi
This inductive conductivity probe is designed to work with the HI720 to measure conductivity in industrial applications. With a durable PVC body and optional Pt100 temperature sensor, you can count on this electrode to stand up to your process environment.
-
Measurement is based on inductive coupling of two toroidal transformers by the liquid.
-
Models with built-in temperature sensor for Automatic Temperature Compensation.
-
Built for everyday, demanding use in industrial applications.
Inductive Conductivity Probe
-
Allows conductivity measurements without any electrical contact between electrodes and process fluid.
-
Models with Built-in Pt100 Temperature Sensor
No Electrodes
-
Common problems such as polarization and contamination are eliminated and will not affect the performance of the electrodeless sensor.
Variety of Cable Lengths
-
Probe models vary in cable length to fit any of your process needs.
PVC Body
-
This rugged material is ideal for indoor as well as outdoor measurements.
-
-
IP67 Rating
-
Fully protected from dust (6) and can also withstand being submerged in 1m (about 3.3 feet) of static water for up to 30 mins (7).
|
Description |
Inductive Conductivity Probe |
|
Conductivity Measuring Range |
0 to 2000 mS/cm |
|
Conductivity Measuring Accuracy |
±2% f.s. |
|
Cell Constant |
approx. 2.4 cm-1 |
|
Temperature Sensor Type |
None, Pt100 (depending on model) |
|
Temperature Response |
90% of the final value, approximately 10 minutes |
|
Overall Length |
40 x 190 x 55 mm (1.57 x 7.48 x 2.16”) ; head: 32 x OD 55 mm (1.25” x OD 2.16”n) |
|
Required Pipe Diameter |
>80 mm (consider installation factor for pipe with diameter < 125 mm) |
Lihat detail lebih lanjut tentang Hanna Instruments (M) Sdn Bhd
