Outline | LS9-16 | LS9-32 | |
---|---|---|---|
Mixing capability | Mixing channels | 32 Mono + 4 Stereo | 64 Mono + 4 Stereo |
GROUP | 16 MIX (Group/AUX) busses | 16 MIX (Group/AUX) busses | |
AUX | 16 MIX (Group/AUX) busses | 16 MIX (Group/AUX) busses | |
MAIN | Stereo, Mono | Stereo, Mono | |
MATRIX | 8 | 8 | |
Input channel functions | HPF, Attenuator, 4-band PEQ, 2x Dynamics, Pan (LR or LCR with CSR) | HPF, Attenuator, 4-band PEQ, 2x Dynamics, Pan (LR or LCR with CSR) | |
Output channel functions | Attenuator, 4-band PEQ, Dynamics | Attenuator, 4-band PEQ, Dynamics | |
On-board processors | 4x GEQ, 4x GEQ/SPX (GEQ: 31-band or 2x Flex15), 50x Output port delay | 4x GEQ, 4x GEQ/SPX (GEQ: 31-band or 2x Flex15), 66x Output port delay | |
I/O | Mic inputs | 16 (Recallable) | 32 (Recallable) |
Phantom power | +48V DC; ON/OFF per channel | +48V DC; ON/OFF per channel | |
AD converter | 24-bit; 128-time over sampling | 24-bit; 128-time over sampling | |
Line outputs | 8 Omni output | 16 Omni output | |
DA converter | 24-bit; 128-time over sampling | 24-bit; 128-time over sampling | |
Digital I/O | 2tr in/out, USB Memory Recorder/Player | 2tr in/out, USB Memory Recorder/Player | |
Expansion slots | Mini-YGDAI (16-in/16-out); Possible to remote HA gain via slot | 2x Mini-YGDAI (16-in/16-out); Possible to remote HA gain via slots | |
Control and others | Ethernet, MIDI, USB (Storage/Key), Word clock I/O | Ethernet, MIDI, USB (Storage/Key), Word clock I/O, Lamp | |
General specifications | LS9-16 | LS9-32 | |
Internal processing | 32bit, Accumulator: 58bit | 32bit, Accumulator: 58bit | |
Sampling frequency rate | Internal | 44.1kHz, 48kHz | 44.1kHz, 48kHz |
External | 44.1 kHz (-10%) to 48 kHz (+6%) | 44.1 kHz (-10%) to 48 kHz (+6%) | |
Signal delay | Less than 2.5 ms (@48kHz) | Less than 2.5 ms (@48kHz) | |
Total harmonic distortion | Less than 0.05% (20Hz-20kHz) | Less than 0.05% (20Hz-20kHz) | |
Frequency response | 0, +0.5, -1.5dB 20Hz-20kHz | 0, +0.5, -1.5dB 20Hz-20kHz | |
Dynamic range | DA: 110dB; AD+DA: 108dB | DA: 110dB; AD+DA: 108dB | |
Hum & noise level | Equivalent input noise | -128dBu | -128dBu |
Residual output noise | -86dBu | -86dBu | |
Crosstalk | -80 dB Adjacent Input Channels, Input to Output | -80 dB Adjacent Input Channels, Input to Output | |
Power requirements | AC100-240V 50/60Hz, and/or Use PW800W | AC100-240V 50/60Hz, and/or Use PW800W | |
Power consumption | 95W | 170W | |
Dimensions | W | 480mm; 18-7/8in | 884mm; 34-13/16in |
H | 220mm; 8-11/16in | 220mm; 8-11/16in | |
D | 500mm; 19-11/16in | 500mm; 19-11/16in | |
Net weight | 12.0kg; 26.5lbs | 19.4kg; 42.8lbs | |
Accessories | Owner’s Manual, AC Power Cord | Owner’s Manual, AC Power Cord, Dust Cover |
Input terminal | Actual load impedance | For use with nominal | Input level | Connector | |||
---|---|---|---|---|---|---|---|
GAIN | Sensitivity | Nominal | Max. before clip | ||||
INPUT 1-n* |
-62dB +10dB |
3kohms | 50-600 ohm Mics & 600ohm Lines | -82dBu | -62dBu | -42dBu | XLR3-31 type* |
-10dBu | +10dBu | +30dBu |
* LS9-32: n=32, LS9-16: n=16
Output terminal | Actual source impedance | For use with nominal | GAIN SW | Output level | Connector | |
---|---|---|---|---|---|---|
Nominal | Max. before clip | |||||
OMNI OUT 1-n* | 75ohms | 600ohm Lines |
+24dB** +18dB |
+4dBu -2dBu |
+24dBu +18dBu |
XLR-3-32 type |
PHONES OUT | 15ohms | 8ohm Phones | - | 75mW | 150mW | ST Phone jack |
40ohm Phones | - | 65mW | 150mW |
* LS9-32: n=16, LS9-16: n=8
** Default
Terminal | Format | Data length | Level | Connector | |
---|---|---|---|---|---|
2TR IN DIGITAL | COAXIAL | IEC60958 | 24bit |
0.5Vpp/ 75ohms |
RCA pin jack |
2TR OUT DIGITAL | COAXIAL |
IEC60958 (Consumer Use) |
24bit |
0.5Vpp/ 75ohms |
RCA pin jack |
Terminal | Format | Level | Connector | |
---|---|---|---|---|
NETWORK (Ethernet) | 100Base-T | - | RJ45 | |
MIDI | IN | MIDI | - | DIN-5pin |
OUT | MIDI | - | DIN-5pin | |
WORD CLOCK | IN | - | TTL/75ohms, Terminated | BNC |
OUT | - | TTL/75ohms | BNC | |
LAMP * | - | 0V-12V | XLR-4-31 type | |
USB HOST | USB1.1 | USB ** | A type USB Connector |
* Only for LS9-32; 4pin=+12V, 3pin=GND; Max: 5W
** Bus powered hubs are not supported.