Deskripsi
Specifications:
Typical Chemical Composition (SUS 304):
-
C: 0.08% max
-
Cr: 18.0-20.0%
-
Ni: 8.0-10.5%
Typical Mechanical Properties (SUS 304):
-
Tensile Strength: 515 MPa min
-
Yield Strength 0.2% Proof: 205 MPa min
-
Elongation: 40%
-
Hardness: 201 HB max
-
0.2% Proof Stress: 280 N/mm2
Typical Chemical Composition (SUS 304L):
-
C: 0.030% max
-
Cr: 18.0-20.0%
-
Ni: 9.0-13.0%
Typical Mechanical Properties (SUS 304L):
-
Tensile Strength: 485 MPa
-
Yield Strength 0.2% Proof: 170 MPa min
-
Elongation: 40%
-
Hardness: 201 HB
-
0.2% Proof Stress: 170 MPa
Differences between SUS 304 and SUS 304L:
-
304L has a 0.03max carbon and is good for welding whereas 304 has a mid range level of carbon
-
304L and 304 are austenitic alloys, which mean that a nonmagnetic solid solution of ferric carbide or carbon in iron is used in giving this stainless steel its corrosion-resistance properties.)
Applications:
-
Stainless Steel has a beautiful surface appearance and strong resistance to corrosion and heat. It is very workable and shows excellent performance even at low temperatures.
-
A highly popular material known for its strength and ornamental values, it is widely used to achieve architectural aesthetics.
-
Excellent in a wide range of atmospheric environments and many corrosive media
-
Subject to pitting and crevice corrosion in warm chloride environments, and to stress corrosion cracking above 60oC
-
Good oxidation resistance
-
Grade 304L stainless steel is more resistant to carbide precipitation
-
Applied in food processing equipment, particularly in beer brewing, milk processing and wine making
-
Kitchen benches, sinks, troughs, equipment and appliances
-
Architectural panelling, railings and trim
-
Chemical containers, including for transport
-
Heat exchangers
-
Woven or welded screens for mining, quarrying and water filtration
-
Threaded fasteners
-
Springs
Profiles Available
-
Round Bar / Rod
-
Flat Bar (HL/No1) / Bus Bar
-
Square Bar
-
Angle Bar
-
Hexagon Bar
-
Hollow Section
-
U-Channel
-
Pipe / Tube
-
Wire (Soft/Hard)
-
Shim / Foil
-
Sheet / Plate / Spring Plate
Lihat detail lebih lanjut tentang KSJ Global Sdn Bhd