Imada Simple Type Vertical Motorized Test Stand (MX Series)

Deskripsi

MX Series

Simple Type Vertical Motorized Test Stand

Simple type motorized test stand has capacity of 1000N and is cost-effective with the limited functions, enabling constant speed and direction, and high repeatability of measurement. It can be used for various measurements such as tension and compression.

 

• Achieves high repeatability with constant testing speed and position
• Performs in 3 modes, including continuous cycle mode for repetitive testing
• Handles a wide range of testing applications to meet your testing requirements with options such as -S (length scale) and -L (long stroke) *-L option only available for MX-500N and MX-1000N
• Offers overload prevention and force control function when connected with force gauge*Activated when ZTS/ZTA series force gauge and CB-508 cable are used together

 

---

 

Simple Operation

• To perform test, you just press the button
• The force gauge travels between the limit knobs on the side of the column at the setting or the fastest speed.

Easy Setup for Test Conditions

• MX series is adjustable the testing speed with dial
• The travelling distance is adjustable by positioning the limit knobs

Three Modes of Operation

 

Manual Mode	Single Cycle Mode	Continuous Cycle Mode
The head moves when press and hold the button.	The head starts moving after press the button, and it returns automatically when it reaches travel limit	The head repeats travelling between its upper and lower travel limit.

---

 

---

 

Specifications

Japan Model	MX-500N	MX-1000N
US Model	MX-110	MX-275
Capacity	500N (50kgf)	1000N (100kgf)
Max. Sample Height (*1)	Approx. 235mm	Approx. 420mm
Test speed	10 to 300mm/min	8 to 240mm/min
Stroke Limit	Controllable with upper and lower knob
Measuring Mode	Manual mode, Single cycle mode, Continuous cycle mode
Function	Emergency stop, force control (*2), overload prevention (*2, *3)
Operating Temperature Humidity	0 to +40 degree Celsius 35 to 70% (avoid condensation)
Voltage	AC100 to 240V, 50/60Hz (Select from 100, 120 and 230V. Accessories are provided accordingly.)
Power Consumption	50W
Weight	Approx. 13kg	Approx. 24kg
Accessory	GF-1 (Grip mounting adaptor)	Grip mounting adapter(GF-2)
	Operation manual, power cable, spare fuse, tools
Available Options *4*5*6	-E: Speed and length meter -S: Length scale -L: Extended stroke by 200mm -V60: Speed 2 to 60mm/min -V600: Speed 20 to 600mm/min -V1200: Speed 40 to 1200mm/min	E: Speed and length meter -S: Length scale -L: Extended stroke by 250mm -V120: Speed 4 to 120mm/min -V400: Speed 15 to 400mm/min -V600: Speed 20 to 600mm/min -V800: Speed 27 to 800mm/min -V1200: Speed 40 to 1200mm/min
Mountable Force Gauge*7	Mechanical Force Gauge: FB, PS, PSM series Digital Force Gauge: DST, DSV, ZTS, ZTA series (Up to 1000N)
		Mechanical Force Gauge: PSH series Digital Force Gauge: ZTS, ZTA series (Over 2500N)

*1 Max. sample height refers to the distance between the table and the tip of force gauge measuring shaft when the head is at the top. (MX-500N/MX1000N: up to 1000N model of ZTS/ZTA series)
*2 ZTS/ZTA series force gauge and optional cable CB-508 are required.
*3 It does not guarantee complete protection against overloading.
*4 Add the option code after the model name to complete the model with options. e.g. When adding long stroke option to MX-500N, the model becomes MX-500N-L.
*5 The deflection amount becomes larger when the option (-L) is selected.
*6 Capacity is reduced as below by some speed change options.
 

Model	MX-500N	MX-1000N
-V400		500N
-V600	250N	500N
-V800		300N
-V1200	100N	200N

Lihat detail lebih lanjut tentang MSP Metrology (M) Sdn Bhd