1.JIS standard is implemented.
2. It belongs to mini cylinder that has compact structure, small volume and light weight.
3. The guide precision of piston rod is high and no additional lubricant is needed.
4. Screw holes are designed for mounting directly at the front cover without any accessories.
5.Piston rod stainless steel barrel make the cylinder adapt general corrosive working environment.
6.It has small cylinder diameter and quick reaction, suitable for the working environment with higher frequency.
Ordering Code
BORE SIZE
|
Stroke(mm)
|
4
Double Acting |
4
Single Acting |
6 R Type |
10
R/U Type |
10
CB Type |
12
R/U Type |
12
CB Type |
16
R/U Type |
16
CB Type |
| 5 | |||||||||
| 10 | |||||||||
| 15 | |||||||||
| 20 | |||||||||
| 25 | |||||||||
| 30 | |||||||||
| 40 | |||||||||
| 50 | |||||||||
| 60 | |||||||||
| 75 | |||||||||
| 80 | |||||||||
| 100 | |||||||||
| 125 | |||||||||
| 150 | |||||||||
| 160 | |||||||||
| 175 | |||||||||
| 200 | |||||||||
| 250 | |||||||||
| 300 | |||||||||
| (+50mm) |
|
Accessories (mm) |
4
|
6 R Type |
10
R Type |
10
CB Type |
12
R Type |
12
CB Type |
16
R Type |
16
CB Type |
| Magnet | ||||||||
| LB | ||||||||
| FA | ||||||||
| Y | ||||||||
| I | ||||||||
| CJ |
Installation & Usage
1.When load changes in the work, the cylinder with abundant output capacity shall be ed.
2.Relative cylinder with high temperature resistance or corrosion resistance shall be chosen under the condition of high temperature or corrosion.
3.Necessary protection measure shall be taken in the environment with higher humidity, much dust or water drops, oil dust and welding dregs.
4.Dirty substances in the pipe must be eliminated before cylinder is connected with pipeline to prevent the entrance of particles into the cylinder.
5. The medium used by cylinder shall be filtered to 40μm or below.
6. Anti-freezing measure shall be adopted under low temperature environment to prevent moisture freezing.
7.The load of the cylinder with the diameter of Φ4 needs to be coaxial with the cylinder to avoid side load, otherwise, piston rod will be bent and deformed and damage the thread at the end of the rod. Single-acting type can not be added in return.
8.If the cylinder is dismantled and stored for a long time, Please to conduct anti-rust treatment to the surface. Anti-dust caps shall be added in air inlet and outlet ports. The front and back cover can not be dismantled, which shall be especially noticed.
Symbol
