VERTEX Super & Simple Indexing Spacer

SUPER INDEXING SPACER : 

• This product combines the advantages of the Super Index with those of a worm-geared index.
• When mounted on a milling, boring or other machine tool it can carry out single-purpose indexing and indirect indexing using the worm-drive mechanism.
• Disengaging the worm drive the 24-notch master plate permits 2, 3, 4, 6, 8, 12 and 24 dividing in the same manner as the Simple Index.
• When the chuck is removed, the unit can be used as a horizontal and vertical type rotary table.
• The operating handle to rotary table worm gear reduction ration is 1:90.
• The operating handle collar is graduated in one minute, and readings down to ten seconds can be set on the vernier.
• Super spacer index include 3 jaw chuck, 10”/250mm face plate, masking plates 2, 3, 4, 6, 8, 12.

SIMPLE INDEXING SPACER : 

• The center through hole is big to be suitable for the large and long workpiece.
• ​Hardened and ground 24 position master plate, can index the special angle of 15 with excellent accuracy.
• CS-Type can be used with 2 pcs type 3-Jaw Chuck. Especially, it does similar work. as rotary table when it match with face plate.
• Rapid indexing and easy operation. It’s a sharp equipment for mass-production.
• Simple index include 3-jaw chuck, Masking Plates 2, 3, 4, 6, 8, 12.
• Used the key guide block, the center can be corrected quickly and accurately.

CC-12A with VSK-12A chuck economical chuck.