Saluki S3502 series spectrum analyzer is adopted with the compact portable box structure, which has advantages of small size, light weight, low power consumption and convenient carrying. The S3502 series spectrum analyzer series currently consists of four types of products.
Key Features of S3502 Series Spectrum Analyzer
| Wide frequency range: 9kHz - Max.44GHz
| Resolution bandwidth: 1Hz - 10MHz
| Low DANL level to -163dBm@1Hz RBW (typ.)
| Excellent phase noise: -106dBc/Hz@100kHz@1GHz carrier
| Extremely high sweep speed: <20ms for 1GHz span
| Flexible interfaces and friendly UI
| Various measurement functions and test mode options
| Portable case which can be conveniently placed and carried
| 12.1'' high brightness LCD touch screen and easy to operate
Saluki S3502 series spectrum analyzer is adopted with the compact portable box structure, which has advantages of small size, light weight, low power consumption and convenient carrying. The broadband millimeter-wave receiver miniaturization integrated design technology, whole phase locking technology based on the broadband VCO, full digital intermediate frequency design technology, and microwave composite multilayer circuit board design technology are adopted for this product, thus realizing high performance indicators and ensuring the economical efficiency of the product.
The S3502 series spectrum analyzer series currently consists of four types of products. The full spectrum of the product is equipped with a preamplifier, so that it has very high receiving sensitivity at any frequency point. For its performance indicators, it has excellent average noise level and phase noise indicator as well as the high scanning speed. For its measurement function, it has the option modes including the interference analyzer channel scanner, AM/FM/PM analyzer, and power meter, as well as a variety of measurement functions including the channel power, occupied bandwidth, adjacent channel power, audio demodulation, emission mask and carrier-to-noise ratio. This product can be used for the test and maintenance of the aviation, spaceflight, wireless communications and radar signals and devices, and it can also be used for the research, development and production of electronic products and the teaching experiment of scientific research institutes.
Test of Components and Parts
The S3502 series spectrum analyzer can be used for the test of parameters and indicators including the gain, frequency response, frequency conversion loss and insertion loss of the components and modules including the amplifier, filter, mixer, attenuator, cable and directional coupler.
Test and Diagnosis of the Transmitter and Receiver
The S3502 series spectrum analyzer has a number of measurement function modes including the spectrum analyzer, interference analyzer, AM/FM/PM analyzer, power meter, and channel scanner, and it also has a number of measurement functions including the channel power, occupied bandwidth, adjacent channel power, carrier-to-noise ratio, field strength, and emission mask; therefore, it can provide the comprehensive spectrum analysis and diagnosis service for the test of the transmitter and receiver.
| Parameter | Specifications | |
| Frequency Range |
S3502D: 9kHz - 20GHz S3502E: 9kHz - 26.5GHz S3502F: 9kHz - 32GHz S3502G: 9kHz - 44GHz |
|
| Tuning resolution | 1Hz | |
| Frequency Reference | Nominal fequency | 10MHz |
| Frequency reference error |
Last calibration date × aging rate + temperature stability + calibration accuracy |
|
| Aging rate |
±5×10-7/year |
|
|
Temperature stability |
±1×10-7 (0°C - 50°C, relative to 25±5°C) |
|
|
Initial calibration accuracy |
±3×10-7 |
|
| Frequency Readout Accuracy |
± (frequency reading×frequency reference error +2% ×sweep width +10% ×resolution bandwidth) |
|
| Frequency Span | Range |
10μs - 600s (zero span) |
| Accuracy |
±2.00% (zero span) |
|
| Resolution Bandwidth | Range |
1Hz - 10MHz (step by 1-3) |
| Accuracy (3.0dB) |
1kHz - 3MHz: ±10% 10MHz: ±20% |
|
| Resolution Bandwidth Change to Uncertainly |
±1.20dB 1Hz - 10MHz (take 100kHz RBW as a reference) |
|
| Video Bandwidth |
1Hz - 10MHz (1-3 times step) |
|
| Detection Mode |
Normal, Peak, Neg Peak, Sample, Average, RMS |
|
|
Display Average Noise Level (50Ω load at the input end, 0dB input attenuation, average detector mode, logarithmic Video Type, RBW normalization to 1Hz, 20-30°C) |
Preamplifier off |
|
| 10MHz - 20GHz | <= -138dBm | |
| 20GHz - 32GHz | <= -135dBm | |
| 32GHz - 40GHz | <= -127dBm | |
| 40GHz - 44GHz | <= -120dBm | |
| Preamplifier on | ||
| 10MHz - 20GHz | <= -157dBm | |
| 20GHz - 32GHz | <= -154dBm | |
| 32GHz - 40GHz | <= -148dBm | |
| 40GHz - 44GHz | <= -140dBm | |
|
Residual Response (RF input match, 0dB attenuation) |
Preamplifier off |
|
| 10MHz - 13GHz | <= -90dBm | |
| 13GHz - 20GHz | <= -85dBm | |
| 20GHz - 44GHz | <= -80dBm | |
| Preamplifier on | ||
| 10MHz - 32GHz | <= -100dBm | |
| 32GHz - 44GHz | <= -95dBm | |
|
(Exceptional frequency: 3200MHz) |
||
|
Single-sideband Phase Noise (Carrier wave 1GHz, 20°C-30°C) |
10kHz frequency offset |
<= -102dBc/Hz |
| 100kHz frequency offset | <= -106dBc/Hz | |
| 1MHz frequency offset | <= -111dBc/Hz | |
| 10MHz frequency offset | <= -123dBc/Hz | |
| Second Harmonic Distortion |
<-60dBc (0dB attenuation, -30dBm input signal) |
|
|
1dB Gain Compression (Double-tone test, 10MHz signal spacing) |
50MHz - 4GHz | >= -2dBm |
| 4GHz - 13GHz | >= -3dBm | |
| 13GHz - 44GHz | >= -3dBm | |
|
3-order Intermodulation Distortion (-25dBm double-tone signal, 100kHz spacing, 0dB attenuation, pre-amplifier off) |
50MHz - 4GHz | >= +7dBm |
| 4GHz - 13GHz | >= +6dBm | |
| 13GHz - 44GHz | >= +6dBm | |
|
Absolute Amplitude Accuracy (10MHz-40GHz, input signal -10 to -50dBm, auto, 20°C-30°C) |
10MHz - 13GHz |
±1.80dB |
| 13GHz - 44GHz |
±2.30dB |
|
| Input Attenuator |
Scope of attenuation 0dB - 50dB, 10dB step Conversion uncertainty: ±1.20dB |
|
| Maximum Safe Input Level (typ.) | >=10dB attenuation |
+30dBm |
| <10dB attenuation |
+23dBm |
|
| Preamplifer on | +13dBm | |
| Reference Level | Range |
Logarithmic scale -120dBm to+30dBm, 1dB step |
| Linear sacle |
22.36μV - 7.07V, 0.1% ste |
|
| Convresion error |
±1.20dB (reference level 0dBm to -60dBm) |
|
| Displayed Scale |
Logarithmic scale |
0.1dB - 10dB per scale, minimum 0.1dB step, 10-scale display |
| Linear scale | 10-scale display | |
| Calibration unit |
V, A, W, dBm, dBW, dBV, dBmV, dBuV, dBA, dBmA, dBuA |
|
| Scale Fidelity |
±1.00 dB |
|
| Size (W×H×D) |
430mm×270mm×180mm (excluding the handle and foot) 430mm×360mm×180mm (including the handle and foot) |
| Weight | <12kg |
| Power Supply |
AC 220/240V, 50/60Hz |
| Power Consumption |
<60W (working state) |
| Operating Temperature |
0°C to +50°C |
| Storage Temperature |
-40°C to +70°C |
|
Electromagnetic Compatibility |
Conforms to GJB3947A-2009 3.9.1 Requirement |
| Test Port |
S3502D/E: Type-N (f) |
|
S3502F/G: 2.4 mm (m) |
|
| Auxiliary Test Interface |
10 MHz reference input/output: BNC female connector |
|
External trigger input: BNC female connector |
|
|
Intermediate frequency output: BNC female connector |
|
|
GPS antenna input: BNC female connector |
|
| Other Interfaces |
LAN, USB, VGA output |
| No. | Item |
| 1 |
S3502 spectrum analyzer |
| 2 |
Standard three-core power line |
| 3 |
USB programmable cable |
| Part No. | Item | Description |
| S3502-H01 |
Tracking generator option |
Provide the independent, tracking source scanning method |
| S3502-003 | User manual | \ |
| S3502-005 | Programming manual | \ |
| S3502-006 | Purple Cat5e cable |
Point to point, 2 meters |
| S3502-007 | GPS antenna |
GPS external antenna |
| S3502-008 |
USB power meter option |
Provide USB power meter function (Needs USB power probe:009/010/011/012) |
| S3502-009 |
87230 USB continuous wave power probe |
Frequency range: 9kHz - 6GHz |
| S3502-010 | 87231 USB continuous wave power probe | Frequency range: 10MHz - 18GHz |
| S3502-011 | 87232 USB continuous wave power probe | Frequency range: 50MHz - 26.5GHz |
| S3502-012 | 87233 USB continuous wave power probe | Frequency range: 50MHz - 40GHz |
| S3502-013 | Interference analyzer option |
Provide spectrogram, RSSI measurement etc. function |
|
S3502-014 |
AM/FM/PM analyzer option |
To realize modulation characteristics analysis of AM/FM/PM signals |
| S3502-015 |
Channel scanner option |
To realize signal power measurement of multiple channels and frequency |
| S3502-016 |
List sweep option |
To realize continuous sweep measurement of various frequency bands |
| S3502-017 |
Field strength option |
Realize the field strength of the dot frequency, frequency scan and list scan |
| S3502-018 |
Zero span IF output |
Output the third or fourth IF signal (Choose one of two) |
| S3502-019 |
89101A antenna |
Frequency range: 10kHz - 20MHz (Needs option 023) |
| S3502-020 | 89101B antenna | Frequency range: 10MHz - 200MHz (Needs option 023) |
| S3502-021 | 89101C antenna | Frequency range: 200MHz - 500MHz (Needs option 023) |
| S3502-022 | 89101D antenna | Frequency range: 500MHz - 4GHz (Needs option 023) |
| S3502-023 | 89401 antenna amplifier |
Frequency range: 10kHz - 4GHz, Type-N (f) (Needs option 019/020/021/022) |
| S3502-024 | 89901 antenna |
Frequency range: 1GHz - 18GHz, Type-N (f) |
| S3502-025 | 89902 antenna |
Frequency range: 18GHz - 40GHz, 2.92mm (f) |
Malaysia
