Overview
Handheld or mechanized plasma system for cutting and gouging metal
Input voltages |
CSA 200 – 480 V / 1-PH / 50/60 Hz 200 – 600 V / 3-PH / 50/60 Hz CE 400 V / 3-PH / 50/60 Hz |
Input current @ 9 kW |
CSA 200/208/240/480 V / 1-PH 52/50/44/22 A 200/208/240/480/600 V / 3-PH 32/31/27/13/13 A CE 380/400 V / 3-PH 15.5/15 A |
Output current | 20 – 65 A |
Duty cycle @ 40° C (104° F) |
CSA 50% @ 65 A / 230 – 600 V / 1/3-PH 40% @ 65 A / 200 – 208 V / 1/3-PH 100% @ 46 A / 230 – 600 V / 1/3-PH CE 50% @ 65 A / 380/400 V / 3-PH 100% @ 46 A / 380/400 V / 3-PH |
Open circuit voltage (OCV) |
CSA 295 VDC CE 270 VDC |
Dimensions with handles |
19.7'' (500 mm) D; 9.2'' (234 mm) W; 17.9'' (455 mm) H |
Weight with 25' (7.6 m) torch |
CSA 64 lbs (29 kg) CE 57 lbs (26 kg) |
Gas supply | Clean / dry / oil-free air or nitrogen |
Recommended gas inlet flow rate / pressure |
Cutting: 400 scfh / 6.7 scfm (189 l/min) @ 85 psi (5.6 bar) Gouging: 450 scfh / 7.5 scfm (212 l/min) @ 70 psi (4.8 bar) |
Input power cable length | 10' (3 m) |
Power supply type | Inverter – IGBT |
Engine drive rating (kW) | System output (amps) | Performance(arc stretch) |
---|---|---|
15 | 65 | Full |
12 | 65 | Limited |
12 | 40 | Full |
8 | 40 | Limited |
8 | 30 | Full |
Thickness | Thickness | Current | Maximum cut speed¹ | Maximum cut speed¹ | |
---|---|---|---|---|---|
Material | (inches) | (mm) | (amps) | (ipm) | (mm/min) |
Mild steel | 10 GA | 3 | 45 | 205 | 5000 |
Mild steel | 1/4 | 6 | 65 | 145 | 3900 |
Mild steel | 1/2 | 12 | 65 | 50 | 1430 |
Mild steel | 3/4 | 19 | 65 | 24 | 610 |
Mild steel | 1 | 25 | 65 | 13 | 350 |
Stainless steel | 10 GA | 3 | 45 | 168 | 4200 |
Stainless steel | 1/4 | 6 | 65 | 120 | 3800 |
Stainless steel | 1/2 | 12 | 65 | 40 | 1150 |
Stainless steel | 3/4 | 19 | 65 | 19 | 490 |
Aluminum | 1/4 | 6 | 65 | 190 | 5500 |
Aluminum | 1/2 | 12 | 65 | 60 | 1660 |
Aluminum | 3/4 | 19 | 65 | 30 | 770 |
¹ Maximum cut speeds are the results of Hypertherm’s laboratory testing. For optimum cut performance , actual cutting speeds may vary based on different cutting applications. Refer to the operator manual for more details.
Operating Data
Thickness | Minimum cut speed | |
---|---|---|
Handheld cut capacity | Handheld cut capacity | |
Recommended | 3/4'' (19 mm) | 20 ipm (500 mm/min) |
Recommended | 1'' (25 mm) | 10 ipm (250 mm/min) |
Severance | 1-1/4'' (32 mm) | 5 ipm (125 mm/min) |
Mechanized pierce capacity | Mechanized pierce capacity | |
1/2'' (12 mm) | – |
Metal removal rate | Groove profile |
---|---|
Gouge capacity | Gouge capacity |
10.7 lbs. (4.8 kg) per hour | .14'' (3.5 mm) D x .26'' (6.6 mm) W |
Below are some of the most common system configurations which include a power supply , torch and work
cable. Additional configurations are listed on our website.
Input voltages |
Handheld systems Standard power supply H65 torch 7.6 m (25') |
Handheld systems Standard power supply H65 torch 15.2 m (50') |
Handheld systems Power supply with CPC port and selectable voltage ratio H65 torch 7.6 m (25') |
Handheld systems Power supply with CPC port and selectable voltage ratio H65 torch 15.2 m (50') |
Mechanized systems Power supply with CPC port and selectable voltage ratio M65 torch 7.6 m (25') |
Mechanized systems Power supply with CPC port and selectable voltage ratio M65 torch 15 m (50') |
---|---|---|---|---|---|---|
200 – 600 V CSA² | 083270 | 083271 | 083275 | 083276 | 083277 | 083278 |
400 V CE³ | 083279 | 083280 | 083284 | 083285 | 083286 | 083287 |
² For use in the Americas and Asia , except China.
³ For use in countries that require CE , CCC or GOST marks.
Power supply options
Standard power supply | Power supply with CPC port and selectable voltage ratio | Power supply with CPC port and selectable voltage ratio and serial interface port (RS-485) | |
---|---|---|---|
200 – 600 V CSA | 083234 | 083266 | 083267 |
400 V CE | 083235 | 083268 | 083269 |
Cable length |
Torches H65 |
Torches H65s |
Torches M65 |
Torches M65m |
Work cables Hand clamp |
Work cables C-style clamp |
Work cables Magnet |
Work cables Ring terminal |
Control cables Remote pendant |
Control cables CNC spade plug⁴ |
Control cables CNC spade plug⁵ |
---|---|---|---|---|---|---|---|---|---|---|---|
10' (3 m) | 083246 | 083250 | – | – | – | – | – | – | – | – | – |
15' (4.5 m) | – | – | 083254 | 083259 | – | – | – | – | – | – | – |
25' (7.6 m) | 083247 | 083251 | 083255 | 083260 | 223125 | 223194 | 223197 | 223200 | 128650 | 228350 | 023206 |
35' (11 m) | – | – | 083256 | 083261 | – | – | – | – | – | – | – |
50' (15 m) | 083248 | 083252 | 083257 | 083262 | 223126 | 223195 | 223198 | 223201 | 128651 | 228351 | 023279 |
75' (23 m) | 083249 | 083253 | 083258 | 083263 | 223127 | 223196 | 223199 | 223202 | 128652 | – | – |
⁴ For use with automation equipment that requires divided arc voltage.
⁵ For use when divided arc voltage is not required.
Consumable type | Torch type | Amperage | Nozzle | Shield/Deflector | Retaining cap | Electrode | Swirl ring |
---|---|---|---|---|---|---|---|
Drag-cutting | Hand | 45 | 220941 | 220818 | 220854 | 220842 | 220857 |
Drag-cutting | Hand | 65 | 220941 | 220819 | 220854 | 220842 | 220857 |
Mechanized | Machine | 45 | 220941 | 220817 | 220854 or 220953 (Ohmic) | 220842 | 220857 |
Mechanized | Machine | 65 | 220819 | 220817 | 220854 or 220953 (Ohmic) | 220842 | 220857 |
Unshielded | Machine | 45 | 220941 | 220955 | 220854 | 220842 | 220857 |
Unshielded | Machine | 65 | 220819 | 220955 | 220854 | 220842 | 220857 |
FineCut® | Hand | 45 | 220930 | 220931 | 220854 or 220953 (Ohmic) | 220842 | 220947 |
FineCut® | Machine | 5 | 220930 | 220931 | 220948 or 220953 (Ohmic) | 220842 | 220857 |
Gouging | Hand | – | 220797 | 220798 | 220854 | 220842 | 220857 |
Gouging | Machine | – | 220797 | 220798 | 220854 | 220842 | 220857 |