HYPERTHERM Powermax125®: Pilihan Terbaik di Johor Bahru (JB), Malaysia, Selangor, Kuala Lumpur (KL), Singapore, Indonesia, Vietnam Amcoweld (M) Sdn Bhd

Deskripsi

Overview

Powermax 125® – Professional grade plasma metal cutting and gouging system for handheld cutting 38 mm and mechanized piercing 25 mm

Maximum productivity

Finish jobs faster with cut speeds 5 times greater than oxyfuel on 12 mm mild steel.
Spend less time on grinding and edge preparation due to superior cut and gouge quality.
Maximize your cutting time with 100% duty cycle.

Low operating costs

Reduce costs with consumable life up to four times longer than other systems in this amperage range.
Electrode end-of-life detection protects the torch and workpiece from damage by automatically stopping power when the electrode is overused.

Easy-to-use for cutting and gouging

No need to change the air pressure. Smart Sense™ technology ensures that it is always correctly set.
Tackle different jobs with multiple, easy-to-use torch styles.

Built and tested to withstand the harshest conditions

Duramax™ Hyamp torches are designed for high-impact and heat resistance.
SpringStart™ technology ensures consistent starting and a more reliable torch.
Low maintenance for maximum uptime.

Specifications

Input voltages	400 V / 3-PH / 50/60 Hz
Input current @ 21.9 kW	400 V / 3-PH / 36 A
Output current	30-125 A
Rated output voltage	175 VDC
Duty cycle @ 40° C	100% @ 125 A / 400 V / 3-PH
Open circuit voltage (OCV)	305 VDC
Dimensions with handles	592 mm D 274 mm W 508 mm H
Weight w/7.6 m torch	48.9kg
Gas supply	Clean / dry / oil-free air or nitrogen
Recommended gas inlet flow rate/pressure	Cutting: 260 l/min @ 5.9 bar Gouging: 212 l/min @ 4.1 bar
Input power cable length	3 m
Power supply type	Inverter – IGBT
Engine drive requirement	40 kW for full 125 A output
Certifications	CE / C-Tick / CU/GOST / Ukr / and Serbian — for use in Europe / Australia / Belarus / Kazakhstan/ Russia / Serbia / Ukraine / and other countries where accepted.
Warranty	Power supplies have a 3-year warranty and torches a 1-year warranty

Operating Data

Capacity	Thickness Cutting	Cut speed
Recommended	38mm	457 mm/min
Recommended	44mm	250mm/min
Severance (hand cutting)	57mm	125 mm/min
Pierce*	25mm	–

* Pierce rating for handheld use or with automatic torch height control

Capacity	Metal removal rate Gouging	Groove profile*
Typical gouge	12.52 kg	hr / 4.3 mm–7.9 mm D x 6.1 mm–9.9 mm W

* Actual groove profile varies with torch angle , arc stretch , and technique

Ordering Information

Standard configurations

Below are some of the most common system configurations which include a power supply , torch and work cable. Additional configurations are listed on our website.

	85° hand torch 7.6 m	85° hand torch 15.2 m	85° and 15° hand torch 7.6 m (without remote pendant)	85° and 15° hand torch 15.2 m (without remote pendant)	180° full-length machine torch 7.6m (with remote pendant)	180° full-length machine torch 7.6m (witouth remote pendant)	180° full-length machine torch 7.6m (with I/O cables – no pendant)	180° full-length machine torch 15.2m (with remote pendant)	180° full-length machine torch 15.2m (without remote pendant)	180° full-length machine torch 15.2m (with I/O cables – no pendant)	180° full-length machine torch and 85° hand torch 15.2 m/7.6 m (with remote pendant)
Power supply with CPC port and voltage divider	059526	059527	059528	059572	059530	–	–	059531	–	–	059529
Power supply with CPC port / voltage divider / and serial port	–	–	–	–	–	059532	059534	–	059533	059535	–

Custom configurations

Power supply options

	Power supply with CPC port and voltage divider	Power supply with CPC port / voltage divider / and serial port
400 V CE	059486	059487

Starter kit consumable options

	Handheld	Mechanized	Mechanized with ohmic retaining cap
Kit	428099	428100	428101

Torch options

	Hand torches (85° cable length)	Hand torches (15° cable length)	Machine torches (180° cable length)	Machine torches (Mini 180° cable length)	Robotic torches¹ (45° cable length)	Robotic torches¹ (90° cable length)	Robotic torches¹ (180° cable length)	Long torches¹ (20''& 45° cable length)	Long torches¹ (20'' & 90° cable length)	Long torches¹ (48' & 45° cable length)	Long torches¹ (48'' &90° cable length)
4.5m	–	–	059515	059514	–	–	–	–	–	–	–
7.6m	059492	059495	059520	059515	059564	059565	059566	059562	059563	059567	059568
10.7 m	–	–	059521	059516	–	–	–	–	–	–	–
15.2 m	059493	059496	059522	059517	–	–	–	059579	059580	059581	059582
22.8 m	059494	059497	059523	–	–	–	–	–	–	–	–

¹ Available Q1 2014.

Cable options

	Work cables (Cable length – Hand clamp)	Work cables (Cable length – C-style clamp)	Work cables (Cable length – Ring Terminal)	Control cables (Cable length – Remote pendant)	Control cables (Cable length – CNC / spade connector / divided voltage)	Control cables (Cable length – CNC / spade connector / no divided voltage)	Control cables (Cable length – CNC / D-sub connector / divided voltage)	Control cables (Cable length – RS-485 / serial comm / unterminated)	Control cables (Cable length – RS-485 serial comm / D-sub)
7.6m	223292	223298	223295	128650	228350	023206	223048	223236	223239
15.2m	223293	223299	223296	128651	228351	023279	123896	223237	223240
22.8m	223294	223300	223297	128652	–	–	–	–	–

Torch Consumable Parts

Nozzles and electrodes are available in various quantities. Contact your distributor for more information.

Consumable type	Torch type	Amperage	Nozzle	Shield/Deflector	Retaining cap	Electrode	Swirl ring
Drag-cutting	Hand	45	420158	420172	220977	220997	220971
Drag-cutting	Hand	65	420169	420172	220977	220997	220971
Drag-cutting	Hand	125	220975	420000	220977	220997	220971
Mechanized	Machine	45	420158	420168	220977 or 420156²	220997	220971
Mechanized	Machine	65	420169	420168	220977 or 420156²	220997	220971
Mechanized	Machine	125/105	220975	220976	220977 or 420156²	220997	220971
FineCut®	Hand	45	420151	420152	220977 or 420156²	420159	220971
FineCut®	Machine	45	420151	420152	220977 or 420156²	220997	220971
Gouging	Hand	30–125	420001	420112	220977	220997	220971
Gouging	Machine	30–125	420001	420112	220977	220997	220971

Recommended Accessories

Wheel/gantry kits

Complete, pre-assembled kits for added mobility or mounting on a cutting table gantry.

229467 Powermax125 wheel kit

229570 Powermax125 gantry kit

Leather torch sheathing

Available in 25′ (7.6 m) sections, provides additional protection for torch leads against cuts, burn-through and abrasion.

024548 Brown leather

024877 Black leather with Hypertherm logo

System dust covers

Made from a flame-retardant vinyl, a dust cover will protect your Powermax system for years

127360 Powermax125

Air filtration kit

A ready-to-install kit with a 1-micron filter and an auto drain moisture separator protects against contaminated air.

228890 Eliminizer filter and cover

Lihat detail lebih lanjut tentang Amcoweld (M) Sdn Bhd