Mahr Universal Length Measuring Machines Precimar ULM-E Series: Pilihan Terbaik di Johor Bahru (JB), Malaysia, Selangor, Kuala Lumpur (KL), Penang, Singapore MSP Metrology (M) Sdn Bhd

Deskripsi

Features

Granite & Air Bearing Technology

Variable length and highly rigid.
Greater productivity through rapid movement of Abbe measuring element and tailstock.

Online Temperature Monitoring

Correction of different expansion behavior of granite and metal and correction of systematic measuring errors due to temperature fluctuations in testpiece and setting standard

Z Measuring System

Greater productivity and option of 2D measuring methods by incorporating Z position and travel values

Large Number of Accessories

Adaptability to measurement tasks thanks to specially configured accessory sets and individual components

Laser Meas. System (with ULM L-E)

Large direct measuring range with maximum measuring accuracy

Powerful MS Windows Software

Maximum convenience; inside thread measurement is supported with automatic Z-positioning

Full Specifications

ULM 300-E / 600-E / 1000-E / 1500-E and ULM 800 L-E / 1500 L-E. Technical Data

Measuring Ranges

ULM 300-E

ULM 600-E / 1000-E / 1500-E

ULM 800 L-E /1500 L-E

External measurement

Direct Difference

0 to 100

0 to 525 / 1,115

0 to 305

0 to 640 / 1,060 / 1,560

0 to 830 / 1,620

Internal meas.

0.5 to 150

0.5 to 485 / 905 / 1,405

0.5 to 670 / 1,465

Taper meas.

External

0 to 305

0 to 640 / 1,060 / 1,560

0 to 830 / 1,620

Internal

4 to 150

4 to 485 / 905 / 1,405

4 to 675 / 1,465

Cylindrical thread

External d2 (P=0.2 to 6)

0.8 to 200*

Internal D2 (P=0.45 to 6)

2.6 to 150

2.6 to 340 / 760 / 1,260

2.6 to 530 / 1,320

Lead (P/T)

–

(0.35) 1,0 to 5.5 (6.5)

Taper thread

External d2

2.6 to 50

2.6 to 85

Internal D2

2.6 to 70

2.6 to 125

2.6 to 125 (205)

Gear

External MdK

7 to 295

7 to 630 / 1,050 / 1,550

7 to 820 / 1,610

Internal MdK

20 to 155

20 to 490 / 910 / 1,410

20 to 680 / 1,470

Measuring instruments with displays

Micrometers, dial indicators, dia comparators, level-type test indicators, two-point internal measuring instr. inside micrometers

5 to 100

5.0 to 300 / 780 / 780

5.0 to 550 / 1340

up to 100

–

0 to 360 / 780 / 1,280

0 to 615 / 1,205

0 to 305

0 to 640 / 1,060 / 1,560

0 to 830 / 1,620

Notes:
*Details in brackets with single measuring wires.
All values in mm.
In some cases, additional standards and optional accessories are required to achieve the measuring ranges indicated.
Values higher or lower than those given can be achieved with special accessories
The concrete geometry and weight of the testpiece may restrict the measuring ranges indicated.

Performance Data

Length meas. System X-axis

Resolution

selectable 0.01 μm or 0.1 μm

Length meas. System Z-axis

Resolution

0.1 μm

Instr. System

Length measuring deviation MPEE1 Reproducibility

**) ≤ (0.09+L/2,000) μm or (0.3+L/1,500) μm

≤ (0.1+L/2,000) μm

0.05 μm or 0.1 μm

0.05 μm

Travel speed

Object table adjustment Measuring spindle

0.015 mm/s; 0.3mm/s; 6 mm/s

(0 to 250) mm/s

Measuring forces

0.2 N; 1.0 N to 4.5 N; 11 N

Dimensions, Weights and Operating Conditions

Instrument dimensions

L x W x H

685 x 280 x 480

1,080/ 1,500/ 2,000 x 380 x 480

1,500 / 2,300 x 380 x 480

Instument weight

in kg

110

160 / 215 / 280

220 / 325

Testpiece weight

for testpiece table

25 kg

for support table

–

10 kg

Electrical connection data

Instrument, PC, laser

220 (110) V; 50 Hz to 60Hz;

approx. 750 VA

Compressed air

–

3 bar (0.3 MPa)

Air consumption

–

≤ 4 l/min at 3 bar

Humidity

–

≤ 60%

Ambient temperature for operational readiness

15°C to 35°C

20°C ± 0.1K; gradient < 0.1K/h

** ULM 300-E only ≤ (0.09+L/2,000) μm

ULM 520 S-E / 1000 S-E. Technical Data

Measuring Ranges

ULM 520 S-E

ULM 1000 S-E

External measurement

Direct Difference

0 to 520

0 to 1,015

0 to 520

0 to 1,015

Internal meas.

0.5 to 365

0.5 to 870

Taper meas.

External

0 to 520

0 to 1,025

Internal

4 to 365

4 to 870

Cylindrical thread

External d2 (P=0.2 to 6)

0.8 to 200*

Internal D2 (P=0.45 to 6)

2.6 to 195

2.6 to 615

Lead (P/T)

(0.35) 1.0 to 5.5 (6.5)

Taper thread

External d2

2.6 to 85

Internal D2

2.6 to 165**

Gear

External MdK

7 to 510

7 to 1,015

Internal MdK

20 to 370

20 to 875

Measuring instruments with displays

Micrometers, dial indicators, dia comparators, level-type test indicators, two-point internal measuring instr. inside micrometers

5 to 180

5 to 745

up to 100

–

0 to 520

0 to 1,025

Notes:
*Details in brackets with single measuring wires.
** Reduced accuracy if > 125 mm
All values in mm.
In some cases, additional standards and optional accessories are required to achieve the measuring ranges indicated.
Values higher or lower than those given can be achieved with special accessories
The concrete geometry and weight of the testpiece may restrict the measuring ranges indicated.

Performance Data

Length meas. System X-axis

Resolution

selectable 0.01 μm or 0.1 μm

Length meas. System Z-axis

Resolution

0.1 μm

Instr. System

Length measuring deviation

with ABBE measuring element only: MPEE1= (0.09+L/2,000) μm

Reproducibility

with base measuring system: MPEE1 = (0.6+L/1,000) μm

for Abbe measuring element 0.05 μm

for base measuring system 0.2 μm

Travel speed

Object table adjustment Measuring spindle

0.015 mm/s; 0.3mm/s; 6 mm/s

(0 to 250) mm/s

Measuring forces

0.2 N; 1.0 N to 4.5 N; 11 N

Dimensions, Weights and Operating Conditions

Instrument dimension

L x W x H

1,080 x 380 x 480

1,500 x 380 x 480

Instrument weight

in kg

160

215

Testpiece weight

for testpiece table

25 kg

for support table

10 kg

Electrical connection data

Instrument, PC, laser

220 (110) V; 50 Hz to 60Hz;

approx. 750 VA

Compressed air

3 bar (0.3 MPa)

Air consumption

≤ 4 l/min at 3 bar

Humidity

≤ 60%

Ambient temperature for operational readiness

15°C to 35°C

20°C ± 0.1K; gradient < 0.1K/h

** ULM 300-E only ≤ (0.09+L/2,000) μm

Lihat detail lebih lanjut tentang MSP Metrology (M) Sdn Bhd