Akasel Mounting Consumables (Cold Mounting)

Akasel Mounting Consumables (Cold Mounting)

Kategori: Akasel Tersedia
Untuk informasi lebih lanjut, kunjungi situs resmi kami di mspmetrology.com.my

Deskripsi

Akasel Cold Mounting resins cure through a chemical reaction and provides protection/support of the sample surface by MSP Metrology (M) Sdn Bhd from Akasel Denmark.
 

Features


Cold Mounting

Cold mounting resins typically consist of two components that cure after being mixed together. Two different systems are available, epoxies and acrylics. The epoxies consist of a liquid resin and a liquid hardener.

Our epoxy resin can be mixed with either the Aka-Cure Slow or Aka-Cure Quick hardener, depending on the requirements. They all have very good adhesion to the sample, which helps to provide the best possible edge retention. They can also be used for vacuum impregnation of fragile and porous samples like ceramics and plasma spray coatings.

We offer epoxy resin and hardeners separate, not as a kit, to make it easy to use either hardener with the resin. Epoxies require good precision when mixing the two components. It can be measured by volume, but weighing is much more precise and the recommended method. Our acrylic resin consists of a powder and a liquid.

Aka-Clear-2 is a fast curing, transparent system with a slightly yellowish tint. It cures in 8 minutes and produces totally clear, bubble-free mounts without having to use a pressure pot.

Mixing of the 2 components is not critical, if a thinner mix is required, a little extra liquid can be added without adverse effect on the cured mounts. With Aka-Clear Powder we ship 2 measuring spoons, 2 reusable mixing cups and 25 wooden mixing pins for easy measuring and mixing of the resin. With the Aka-Resin Epoxy we ship the same, except the measuring spoons, as the epoxy resin and hardener should be measured by weight and not by volume.

 


Characteristics


Type Epoxy Acrylic
Component 1 Aka-Resin Liquid Epoxy
Viscosity: 600-700 cps @25°C
Aka-Clear-2 Powder
Component 2 Aka-Cure, Slow
Viscosity: 20 cps @25°C
Aka-Cure, Quick
Viscosity: 80 cps @25°C
Aka-Clear-2 Liquid
Mixing ratio by weight 100 g of resin :
12 g of Aka-Cure, Slow
100 g of resin :
26.3 g of Aka-Cure, Quick
10 g of powder :
6.3 g of liquid
Mixing ratio by volume 100 parts of resin :
13.5 parts of Aka-Cure, Slow
100 parts of resin :
30 parts of Aka-Cure, Quick
2 parts of powder :
1 part of liquid
Curing time 8-24 hours @ 22°C. Long pot life and low peak temperature, suitable for both vacuum impregnation and mounting of heat sensitive samples. Not suitable for large mounts due to exces sive exothermal reaction. 30 min. when heated to 80°C. Peak temperature up to 200°C.
For very hard, transparent mounts. Very large mounts can be made using a 2 cycle curing schedule. First, the mount is cured without heating in 8 hours, followed by a 1h cycle@ 100°C
8-10 minutes @ 22°C. Peak temperature up to 90°C.
Shrinkage, 1-5,
1 = best/lowest
1 2 3
Recommended
applications
Transparent, very low curing temperature, no shrinkage, for sensitive materials.Vacuum impregnation. Transparet, very fast epoxy system, for vauum impregnation of porous sample. Completely clear for easy visibility of sample, mounting of electronic components, failure analysis.
 


Full Specifications


Clear, low viscosity epoxy resin
Product no. Product name Contents GRWT kg
25101115 Aka-Resin Liquid Epoxy 1 L 1.22
25101117 Aka-Resin Liquid Epoxy 5 L 5.71
 
Epoxy hardener, 8-24 hours cure @ 22°C
Product no. Product name Contents GRWT kg
25101213 Aka-Cure Slow 500 ml 0.55
 
Epoxy hardener, 30 min cure @ 80°C
Product no. Product name Contents GRWT kg
25101223 Aka-Cure Quick 500 ml 0.55
 
Clear acrylic resin, 8-10 min cure @ 22°C
Product no. Product name Contents GRWT kg
25202311 Aka-Clear-2 Powder 1 kg 1.13
25202313 Aka-Clear-2 Powder 5 kg 5.40
25202413 Aka-Clear-2 Liquid 500 ml 0.81
25202415 Aka-Clear-2 Liquid 1 L 0.99

Lihat detail lebih lanjut tentang MSP Metrology (M) Sdn Bhd
MSP Metrology (M) Sdn Bhd
MSP Metrology (M) Sdn Bhd Video Measuring Machine Johor Bahru (JB), Digital Microscope Supplier Malaysia, Selangor, Hardness Tester Supply Kuala Lumpur (KL), Penang, Singapore ~ MSP Metrology (M) Sdn Bhd