Imada Digital Force Gauge (DSV Series)

Imada Digital force gauge DSV series is advanced model from DST series for handheld use with 2N to 1000N capacity by MSP Metrology (M) Sdn Bhd from Imada Japan

Features

Digital force gauge DSV series
 

• Sounds alarms when you tilt it to right, left or up, down from the preset position to ensure high repeatable testing
• Great portability with long battery life (lasts 30 hours continuously at max), and various charging methods (charges from a PC or a mobile battery)
• Easy data management using supplied software Force Logger via USB connection to PC
• Allows high efficient testing with continuous peak mode
• Internal memory function (1000 points) to recall previous data
• In capacity up to 1000N, handling a wide range of force testing

DSV improves reproducibility in hand-held use.

Digital force gauge for handheld (advanced model) is designed to improve repeatability even when hand-held. Additional functions are topped to DST. When handheld type is used, the measurement angle tends to be inconsistent, which limits the repeatability of measurement. The added function reduces variation in measurement angles and thus improves repeatability. Other useful features include the ability to continuously acquire peak values without button operation and also the internal memory. Some functions require connection to separately-sold products.

 

---

Greater Accuracy

DSV sounds alarms when you tilt it to right/left or up/down from the preset position
– DSV has tilt-sensing function, sounding alarms when it senses a tilt from the pre-set position.
– When it sounds an alarm, “NG” is recorded.
 

Easier Management.

Connect maximum 4 pcs of DSV to PC at the same time, can record acquired data, date, OK judgement.

* You need a dedicated optional software for this.
 

Safety Measure

You can prevent DSV from sensor breakdown due to mechanical stopper – DSV-2N/5N/20N/50N has mechanical stopper for overload preventing.

* You cannot prevent overload in some cases
 

Longer Battery Life

Battery life lasts 30 hours at maximum when its backlight is off. You can charge it from a PC or a mobile battery.

Features

Specifications

DSV Specifications

*1 These are the specifications for International model. Note that the available units are different from Japanese domestic model and
international one. kN is available at 1000N, mN and gf is available at 2N and 5N ranges.
*2 You cannot use Continuous peak mode when the measurement does not reach 10% of the force gauge’s capacity. Instead, use Peak
mode. Continuous peak mode could not fit enough for measurement with a shock such as break tests. Contact us for further details.
*3 The weights are slightly different by the model.