Automatic Crimp Pull Tester
ACT-1000N is automatic crimp tester with 1000N capacity. It enhances test efficiency since all you have to do is press start button, then the tester automatically performs test and saves data.
Japan Model | ACT-1000N | ACT-1000N-300v |
US Model | ACT-220 | ACT-220-300V |
Capacity | 1000N | |
Resolution | 1N | |
Accuracy | Accuracy +/-0.5% F.S +/-1digit | |
Unit | Unit N, kgf ,lbf (*1) | |
Sampling rate | 2000Hz | |
Safe overload rating | Approx. 150% F.S. | |
Overload warning | 110% or less | |
Measuring speed | 10/25/50/100 mm/min (Choose from 4 steps) | 25/50/100/300 mm/min (Choose from 4 step) |
Stroke | Approx.50mm | |
Allowable Sample Diameter | Terminal side: 1~8mm (*2) | |
Harness side: 1~8mm (*2) | ||
Allowable sample length | 100mm or more | |
Mode | BREAK/KEEP mode | |
Number of registered test condition |
26 patterns(A~Z) | |
Output | USB/RS232C/pass or fail decision signal (OK/NG) | |
Security lock | Emergency stop button and Overload prevention (at the power on) | |
Power supply | AC100~240V | |
Weight | Approx.11kg | |
Size | W400*D240*H150 | |
Operating environment |
Temperature :0~40 degree Celsius Humidity:20~80%RH |
|
Approved standard |
-JIS C2805(2010) “Crimp-type terminal lugs for copper conductors.” -JIS C 5402-16-4 (2012) “Connectors for electronic equipment-Tests and measurements” -UL 486A-486B(2013) “ Standard for Safety for Wire Connectors, 9.3.4 Pullout test” |
|
Accessory | Software, USB cable, Power cord, Inspection Certificate |