The low power design of the dBi HART level sensors means they are ideal for remote locations, wet well monitoring, sewer network monitoring, silo level measurement, solid level measurement, tank level measurement, and stock / inventory control.
The Device Type Manager (DTM) from Pulsar Measurement enhances the dBi's capabilities meaning that end-users are able to communicate with the ultrasonic level sensors using FDT framework applications such as PACTware. The dBi HART non-contacting level sensors also benefit from Pulsar Measurement's world-leading DATEM technology. DATEM enables the sensors to zone in on the echo from the true target, ignoring stationary echoes from other elements in the measurement path, eliminating the commonly seen loss of echo problem.
Features
Technical Specifications
| General Specifications | |
|---|---|
| Spec: | Description: |
| Measurement Range: | 125 mm to 15 m (4.9 in to 49.2 ft) |
| Sensor Body Material | Valox 357 PBT |
| Mounting Connection | BSP or 1 in NPT |
| Operating Temperature | -40 °C to +80 °C (-40 °F to +176 °F) |
| Input Voltage Range | 0-28 V DC |
| Output | 4-20mA output, resolution 1μa |
| Current Consumption | 3.8-22mA |
| Boot-Time | From power-up to stable reading: Cold boot = 9 seconds, Warm boot (within 12 hrs from the last start-up) = 4 seconds |
| Communication Protocol | HART 7 |
Lihat detail lebih lanjut tentang HSA ASIA SDN BHD
Malaysia
