TC80-D3V DIN rail mount torque converter with 3ch analog output: Pilihan Terbaik di Johor, Johor Bahru, JB, Malaysia IMS Mechatronics Sdn Bhd

Deskripsi

・TC80-D3V is a compact DIN-rail mount torque converter
・High-speed sampling of 16kS / s visualizes steep torque fluctuations.
・It also supports the UTM series rotary encoder option!
・3ch analog output torque, rotation speed, and angle.
・Up to 100 saved hold values can be output as data.

Light weight & compact body for 35mm DIN rail mount

Application software for USB interface

With communication through USB interface,
graph display, reading hold data,
setting parameters, and calibration can be done.

Analog section
Signal input range	-10 to +10V (UTMⅢ/UTF Option) Input impedance: 1MΩ or more -5 to +5V (UTMⅡ/UTMV) Input impedance: 1MΩ or more
Accuracy	Non-linearity： within 0.02%FS±1digit Zero drift： within 0.2mV/℃ RTI Gain drift：within 0.01%/℃
Digital low-pass filter	PASS,1 to 1kHz
A/D converter	Rate ：16000times/sec Resolution：24bit (binary)　　Approx. 1/30000 against 10V
Analog monitor output (Test point / UTF Option)	Transmitted input voltage
Pulse input for rotation speed (open collector input/UTMⅡ/UTMV/UTMⅢ)
Max. rotation speed	Depend on UTMⅡ/ UTMV/ UTMⅢ
Min. rotation speed	Selectable from 15, 10, 5, 3, 2rpm (when pulse rate is 4 ppr) Selectable from 60, 40, 20, 12, 8rpm (when pulse rate is 1 ppr)
Min. pulse width	50μs
Circuit configuration	No-voltage contact input (minus common) Connectable to open collector (Ic=Approx. 10mA)
Rotation speed input for low speed(Pulse input, open collector)
Maximum input frequency	Approx. 1000rpm
Minimum input frequency	0.1rpm
Minimum detection pulse width	5μs
Circuit configuration	No-voltage contact input (minus common) Open collector connectable (Ic＝Approx. 10mA)
Pulse input for rotation speed (Line driver: RS-422A compliant/ UTF option)
Max. frequency	Depend on UTF
Circuit configuration	Line driver (RS-422A compliant)

Encoder input(Pulse input)	UTMⅡ/UTMⅢ Compatible with rotary encoder option

Display section
Display unit	Character height 8mm Numerical display by 7-segment green LED
Display content	Switchable numeric display (torque, rotation speed, Power/ Angle)
Display frequency	Selectable from 1, 3 , 6, 13, 25 times/sec.

External signal
Output signal (2)	Selectable/ configurable Transistor’s open collector output Vceo=30V、 Ic=50mA
Input signal (1)	Selectable/ configurable Contact (relay, switch, etc.) or non contact (transistor, photo coupler, etc.) Input is ON when shorted to COM terminal

Interface
USB	USB Interface
D3V	D/A converter voltage output(3ch)
485	RS-485 Interface
422	RS-422A Interface (UTF Option)

General performance
Power supply voltage	DC24V ±15%
Power consumption	6W typ.
Operating conditions	Temperature: Operating temperature range: -10℃ to +50℃, Storage temperature range: -20℃ to +85℃ Humidity: 85%RH or less (non-condensing)
Dimensions	34(W)×88(H)×91(D)mm (Projections excluded)
Weight	Approx. 230g
CE marking certification	EMC directives EN61326-1

Attachments
Quick manual	2
Mini driver	1
Various I/O connector	3
Operating tool	1

iMS Motion Solution (Johor) Sdn Bhd (Company Registration 1098771-W)

No.7, Jalan Sasa 4,Taman Gaya, 81800 Ulu Tiram, Johor Bahru, Johor. Malaysia.

TEL:+607-8635240 FAX: +607-8637240

MOBILE: +6019-6774477

EMAIL: [email protected] | WhatsApp | www.ims.com.my

HOTLINE : 1700-818-330

whatsapp us now !

Brand Name

| MOTION DEVICES SPECIALIST | SYSTEM and CONTROL INTEGRATION |

Return / Refund Policy :
All goods sold are not returnable & we accept goods ex-change with equal or lower value of good purchased. If the ex-change items are higher than purchased items, buyer shall top up the differential cost. All payment made are not refundable, please confirm the purchase items code & cost with our sales representative before place orders.

Shipping and Fulfillment :
Thank you for your purchase. Once we have confirmed your payment, we will prepare and ship out your order out within 24-48 hours.( For ex-stock items only, Indent items subject to delivery stated in quotation & conversation in emails). Once your order has been shipped out, you will receive an email notification with the tracking number and tracking details inside.

Private Policy
General Statement of Principles
As described in detail below, any information we gather at this web site is strictly for our use and is not shared with any other entity, public or private, for any reason - period. We will not sell or give away any lists or other data that we may retain and we do not purchase such information from other sources.
Statistical Data
Our servers (as most) track IP addresses and referring pages to help with site maintenance and improvements. This data is viewed only as anonymous statistics to show the busiest times of the day or week, pages with errors and how effective our advertising has been. This information is not used for any other purpose.
Personal Information Collected - Order Forms
With the exception of credit card info, we store the information from your order form to allow us to track consulting issues or refer to a previous order to help provide some customer service. You may elect to have your information completely removed from this system by e-mailing us at [email protected] with your request. We do not store any type of sales information.
Information Correction or Removal
If you wish to correct, update or remove any information about you that may be in our records, please send us e-mail at [email protected] with the details of your request. If you wish to contact us further, please find complete contact information on our contact page.
Cookies
Cookies are files with small amount of data, which may include an anonymous unique identifier. Cookies are sent to your browser from a web site and stored on your computer's hard drive. We use 'cookies' to store your cart contents for you. You can instruct your browser to refuse all cookies or to indicate when a cookie is being sent. However, if you do not accept cookies, you may not be able to use the checkout section of our site.

Changes To This Privacy Policy
This Privacy Policy is effective as of 1^st Jan 2019 and will remain in effect except with respect to any changes in its provisions in the future, which will be in effect immediately after being posted on this page.

Lihat detail lebih lanjut tentang IMS Mechatronics Sdn Bhd