Deskripsi
Pressure Regulators
Pressure regulators (diaphragm type) keep the working pressure constant regardless of pressure fluctuations in the system and of air consumption, providing secondary air exhaust (relieving) and almost complete independence of primary pressure. Working pressure ranges from 0,5 to 3, 6, 10 and 16 bar. Operation by means of a toggle or handwheel. Special models (for example, without secondary air exhaust) upon request. Gauge can be mounted on either side. Port sizes G ⅛ to G½ and G¾ to G1½ or G1½ to G2. Important: Use of filter always recommended.
60 bar Pressure Regulator
Pressure regulator (piston type). Port sizes G 1 to G 1¼. Secondary air exhaust (relieving) and almost complete independence of primary pressure are provided. Working pressure ranges: 0,5 to 12, 22, 35 and 50 bar. Gauge can be mounted on either side. Bracket mounting upon request. Important: Use of filter always recommended.
Pressure line regulator
Pressure line regulator for a maximum inlet pressure of 200 bars. Suitable for compressed air, nitrogen and other neutral compact gases.
Pressure Regulator Brass
Pressure regulators (diaphragm type). Port size G ¼ and G ½. Secondary air exhaust (relieving) and almost complete independence of primary pressure. Working pressure ranges 0,5 to 3, 6, 10, 16 and 25 bar. Adjustment by means of a locknut. Gauge can be mounted on either side. Panel mounting or bracket mounting upon request. Important: Use of filter always recommended.
Pressure Regulator With Internal Gauge in Setting Knob
Pressure regulators (diaphragm type), ideal for panel installation. Port size G ⅜. Secondary air exhaust (relieving) and almost complete independence of primary pressure. Working pressure ranges from 0,5 to 3, 6, 10 and 16 bar. Gauge integrated in setting handwheel. Panel mounting possible if desired. Important: Use of filter always recommended.
Precision Pressure Regulators
Pressure regulators (diaphragm type) with low operating air consumption. Port sizes G ¼. Secondary air exhaust (relieving) practically without hysteresis. Working pressure ranges 0,1 to 6 bar. Gauge can be mounted on either side. Setting handwheel with locknut. Panel mounting or bracket mounting possible, if desired. Important: Use of filter always recommended.
Filter Pressure Regulators
Compressed air filter and pressure regulator combined in one piece of equipment. The purified compressed air is kept at constant pressure regardless of fluctuations in the system or in the air consumption. This equipment provides secondary air exhaust (relieving) and almost complete independence of primary pressure. Diaphragm regulator with working pressure ranges from 0,5 to 6, 10 or 16 bar. Operation by toggle or handwheel. Special models also available (for example without air exhaust) upon request. Gauge can be mounted on the front or back. Port sizes G ⅛ to G½.
Water Pressure Regulator
Pressure regulators protect water installations against line pressures that are too high. When the specification are observed, these can also be applied in industrial and commercial sectors. Deviations in pressure are avoided during use and the water consumption is reduced. The pressure set at different primary pressures is maintained at a constant level. Disturbing flow noises are reduced at the same time.
Lihat detail lebih lanjut tentang SK - TEC AUTOMATION & ENGINEERING SDN. BHD.
