Accretech Coordinate Measuring Machine (XYZAX AXCEL Series)

Class Highest Level Accuracy

Maximum permissible length measurement error E0, MPE：1.8 + 3L/1000 μm*. A newly developed highly rigid bridge delivers the highest level accuracy in class

Stunning Speed With Newly Developed Drive Mechanism

Amazing speed is achieved by review of the drive mechanism. A maximum drive speed of 700 mm/sec and maximum acceleration of 2300 mm/sec²

Enhanced Resistance To Environment

This structure prevents deformation of the guide and carriage due to temperature changes, increasing resistance to environment. Temperature to guarantee accuracy: 15 to 30°C.

Equipped With 2-Axis Rotating Head

By combining 2-Axis rotating head RDS with scanning probe VAST XXT, XYZAX AXCEL can perform high accuracy oscillating scanning measurement at many different angles.

Temperature Range For Guaranteed Accuracy / X-Axis Guide Cover

If you select 16 – 26°C as the temperature range for guaranteed accuracy for 9/15/6 or smaller size, you can choose not to use the X-axis guide cover.

Base Cover

You can also select whether or not to use the base cover intended to cover the lower part of the machine (when the size of machine is Z600 or smaller and the optional air anti-vibration unit is not used). Not using the base cover is effective when you want to keep the initial cost as low as possible.

Probe Composition With Renishaw PH Head

The probe composition of XYZAX AXCEL PH can be selected according to whether the measurement position is to be changed automatically or manually, as well as your specific needs such as the use of modules that differ in the stylus length, measurement force, etc.

Motorized Indexing Probe Head – PH10T PLUS

• Horizontal surface rotation angle 180°
• Vertical surface rotation angle 0 to ±105°
• Probe automatically rotates to conduct measurement

Manual Positioning Probe Head – PH1 + TP2

• Horizontal surface rotation angle 360°
• Vertical surface rotation angle ±115°
• Measurement position changed easily using accompanying wrench

Automatic Coordinate System Recognition

Measured geometric elements and items required for coordinate system settings (spatial compensation, rotational compensation, origin) are determined automatically and these settings are configured.

On-Screen Probe Angle Simulator (For Articulating Probe Head)

The on-screen probe angle simulator provides a screen image of the probe positioned at the input rotation angle and the inclination angle, so the operator can confirm that the desired result has been attained.