MEANWELL 320W CONSTANT VOLTAGE + CONSTANT CURRENT LED DRIVER - HLG-320H SERIES - HLG-320H-30
HLG-320H-30
Features
Constant voltage + constant current mode output
Metal housing with class I design
Built-in active PFC function
IP67/IP65 rating for indoor or outdoor installations
Function options: output adjustable via potentiometer; 3 in 1 dimming
Typical lifetime >62000 hours
7 years warranty
Applications
LED street lighting
LED high-bay lighting
Parking space lighting
LED fishing lamp
LED greenhouse lighting
Type ''HL'' for use in Class I, Division 2 hazardous (Classified) location.
GTIN CODE
Description
HLG-320H series is a 320W AC/DC LED driver featuring the dual mode constant voltage and constant current output. HLG-320H operates from 90 ~ 305VAC and offers models with different rated voltage ranging between 12V and 54V. Thanks to the high efficiency up to 94%, with the fanless design, the entire series is able to operate for -40°C ~ +90°C case temperature under free air convection. The design of metal housing and IP67/IP65 ingress protection level allows this series to fit both indoor and outdoor applications. HLG-32oH is equipped with various function options, such as dimming methodologies, so as to provide the optimal design flexibility for LED lighting system.
SPECIFICATION
Model : HLG-320H-30
Output
DC voltage : 30V
Constant current region : 15 ~ 30V
Rated current : 10.7A
Rated power : 321W
Ripple & noise (max.) : 200mVp-p
Voltage adj. range : Adjustable for A/C-Type only (via built-in potentiometer) / 26 ~ 32V
Current adj. range : Adjustable for A/AB/C-Type only (via built-in potentiometer) / 5.35 ~ 10.7A
Voltage tolerance : ±1.0%
Line regulation : ±0.5%
Load regulation : ±0.5%
Setup, rise time : 2500ms, 50ms/115VAC 500ms, 80ms/230VAC
Hold up time(typ.) : 15ms / 115VAC, 230VAC
Input
Voltage range : 90 ~ 305VAC 127 ~ 431VDC
Frequency range : 46.5 ~ 53Hz
Power factor : PF>0.98/115VAC, PF>0.95/230VAC, PF>0.92/277VAC at full load (Please refer to ''Power Factor Characteristic'' curve)
Total harmonic distortion : THD < 20% when output loading ≧ 50%/115VAC/230VAC input and output loading ≧75%/277VAC input
EFFICIENCY (Typ.) (230Vac) : 94%
EFFICIENCY (Typ.) (277Vac) : 94.5%
AC current : 12V : 3.5A/115VAC 1.6A/230VAC 1.45A/244VAC
Inrush current : COLD START 70A(t =1010 s measured at 50% I ) at 230VAC; Per NEMA 410
Max. No. of PSUs on 16A Circuit breaker : 1 unit (circuit breaker of type B) / 2 units (circuit breaker of type C) at 230VAC
Leakage current : <0.75mA / 277VAC
Protection
Over current : 95 ~ 108% / Constant current limiting, recovers automatically after fault condition is removed
Short circuit : Hiccup mode, recovers automatically after fault condition is removed
Over voltage : 33 ~ 37V / Shut down o/p voltage, re-power on to recover
Over temperature : Shut down o/p voltage, re-power on to recover
Environment
Working temp. : -40 ~ +770°C
Working humidity : 20 ~ 95% RH non-condensing
Storage temp. humidity : -40 ~ +80°C, 10 ~ 95% RH
Temp. coefficient : ±0.03%/℃ (0 ~ 50 ℃ )
Vibration : 10 ~ 500Hz, 5G 12min,/1 cycle, period for 72min. each along X, Y, Z axes
Safety & EMC
Safety standards : UL8750(type”HL”), CSA C22.2 No. 250.0-08; BS EN/EN/AS/NZS 61347-1, BS EN/EN/AS/NZS 61347-2-13 independent; GB19510.1,GB19510.14; IP65 or IP67 (except for HLG-320H C-type); J61347-1, J61347-2-13 (except for B,AB,C and D-type), EAC TP TC 004;KC61347-1,KC61347-2-13(except for AB,C-type) approved
Withstand voltage : I/P-O/P:3.75KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC
E S L Lighting (M) Sdn BhdLED Lighting Supplier Selangor, Lighting Shop Seri Kembangan, Kuala Lumpur (KL), Decorative Lighting Supplies Malaysia ~ E S L Lighting (M) Sdn Bhd
Malaysia
