Vitiny Metallographic Digital Microscope UM20-GN08 Series

Vitiny Metallographic Digital Microscope UM20-GN08 Series

Kategori: Vitiny Tersedia
Untuk informasi lebih lanjut, kunjungi situs resmi kami di mspmetrology.com.my

Deskripsi

UM20-GN08

Metallographic Digital Microscope

ViTiny UM20-GN08 DiGi microscope directly connect to Monitor, plug and play, convenient for quick inspection. Together with continuous autofocus, it increases working effectiveness.

Its standard 4x /10x /20x object lens can reach max 2042x, check Micron samples, has reasonable price. UM20-GN08 is much cost effective.

Light source is quite important to Microscope’s observation, UM20-GN08 adapt the adjustable coaxial light source that is advantage to examine wafer, materials and film etc in SEMI conductor field, along with the IR remote controller for control of brightness, focus, snapshoot and storage.

The others, UM20-GN08 also connect to Windows PC, Android table, MAC PC via USB 3.0 cable. The diverse platform satisfy User’s demand. With new UmViewer computer software, expanding Crosshairs function, auto calibration system, auto locate the edge, subsidiary magnifier and so on.

They simplify measure procedure.

 


 
High Magnification

ViTiny metallographic microscope UM20-GN08 has large magnifications that can goes up to 2042x. This will enable user to use it for typically used to observe or examine objects with great detail by providing a significantly enlarged view. 

Multiple Lens Available

Multiple lens are available to be used with UM20-GN08. Each lens will either increase or decrease the magnifications. Availabe lens comes in X, 10X, and 20X. User can use it according to their needs and preference.

Diverse Platform

UM20-GN08 also can be connect to Windows PC, Android table, MAC PC via USB 3.0 cable. This will make it easy for user to do measurement, inspection and at the same time capturing photo or video. Such many functions comes in such a user-friendly software.
 


 

UMViewer Software

 

 
 

Metallographic Digital Microsope UM20-GN08 General Features
 

  • Magnification: 284x – 2042x on 24″ monitor
  • Working Distance: 1.6 – 15.7mm
  • Field-of-view: 1.87 – 0.26mm
  • CMOS Sensor: 2M Pixels
  • Interface of Output: 1080p Full HD & USB 3.0 TYPE-C High Speed Transmission
  • Focus System : IR Remote Control, Alternative Auto and Manual Focus
  • Light : White Light, Allow to adjust brightness from remote control or sofware
  • Device Dimension : 66(W) x 68(D) x 255(H) mm
  • Power Supply : DC 5V/2A , Cable Length : 180 cm

Lihat detail lebih lanjut tentang MSP Metrology (M) Sdn Bhd
MSP Metrology (M) Sdn Bhd
MSP Metrology (M) Sdn Bhd Video Measuring Machine Johor Bahru (JB), Digital Microscope Supplier Malaysia, Selangor, Hardness Tester Supply Kuala Lumpur (KL), Penang, Singapore ~ MSP Metrology (M) Sdn Bhd