Deskripsi
Description
Flowfill Grout GP MY is a multi-purpose non-shrink Class-A cementitious grout. It is based on portland cement, graded aggregate, and chemical additives, which impart controlled expansion whilst in the plastic state. The gaseous expansion system compensates for shrinkage and settlement in the plastic state.
Benefits
- Gaseous expansion system compensates for shrinkage and settlement whilst in the plastic state
- Can be dry-packed, rammed, trowelled, poured, and pumped
- Economical, low in-place cost
- Ready to use, premixed, requires only the addition of water
- No metallic iron content to cause staining
- Lower water/cement ratio reduces drying shrinkage, and permeability and increases durability
- Excellent flow characteristics, when used in fluid consistency, will fill intricate cavities
- Complete void filling resulting from the gaseous expansion in a plastic state
Recommended Uses
- All general-purpose grouting
- Precast and prestressed panels
- Grouting in column-based, base infilling
- Fill core holes, rod holes, and defects in concrete
- Fill in grout for hollow block walls
- Joints between precast panels and other joints
- Till slab panels
- Caulking of joints and pipe
Packaging
Lihat detail lebih lanjut tentang CHENG HUAT HARDWARE (SENTUL) SDN BHD
