HYLY-RR Melt Flow Index Tester: Pilihan Terbaik di Kuala Lumpur (KL), Malaysia, Selangor, Penang Redmark Industry Sdn Bhd

Deskripsi

Description:

HYLY-RR melt flow index tester can be used for ABS, polystyrene, polyethylene(PE), polypropylene(PP),

polyamide, fiber resin, acrylate, POM, fluorine plastic, polycarbonate and other plastic materials, the melt flow rate

(MFR) or the melt volume flow rate (MVR) to be determined.

Standards:

GB/T3682-2000, ISO1133-97, ASTM1238

Characteristics:

1. Fast heating speed, very small overshoot.

2. High precision of constant temperature.

3. Can accelerate recover to constant temperature condition after padding.

4. Can use manual and automatic material trimming test method.

5. LCD display, equipment with built-in micro printer, test result can be printed autocratic

Technical parameter:

Machine size(WHD)	250510350mm
Power	AC220V±10% 50/60HZ
Barrel parameters	Inner hole 9.55±0.025mm
Pistons parameters	Piston head: 9.475±0.015mm
Piston length	H=6.35±0.1mm
Parameters	Extrusion hole 1=2.095±0.005mm
Temperature parameter	With intelligent temperature control instrument, with four pairs of significant temperature setting control, PID parameters can be automatically set, precision up to ± 0.1 degree centigrade
Temperature range radius	400℃
Temperature accuracy blade to jawand dust collector	±0.2 ℃
Display resolution	0.1℃
Maximum consuption	< 600W
Temperature recovery time	less than 4 min.
Weight parameters
Weight accuracy	±0.5%
Basic configuration	0.325kg, 1.kg, 2.1kg, 3.kg, 5.kg, 10.0kg, 12.kg, 21.6kg
Position detection
Loop distance from up and down	30mm
Control precision	± 0.1mm
Test flow control
Times of cutting the material	0 ~ 10 times
Material cutting interval	0 ~ 999s(set reference Table 2)
Control flow reaches the set temperature without volatility
Barrel temperature time	15 min
Material be installed	1 min
Material sample temperature recovery time	4 min.
When binder set	1min