Aim-TTi Digital Bench Power Supply 400W, 1 Output 0 → 20V 0 → 20A

Aim-TTi Digital Bench Power Supply 400W, 1 Output 0 → 20V 0 → 20A

Kategori: Aim-TTi Tersedia
Untuk informasi lebih lanjut, kunjungi situs resmi kami di hexoind.com

Deskripsi

Aim-TTi Digital Bench Power Supply 400W, 1 Output 0 → 20V 0 → 20A, EX2020R, 507-7106
 

Product Details
EX-R Series Single, Dual and Triple Output PSUs
 
The EX-R series of compact mixed-mode regulated power supplies offers output power from 175 → 420W. The models have high resolution four digit meters and switchable remote sense terminals.
 
Mixed-mode regulated with linear final regulation
Constant voltage or constant current with automatic cross-over
4 digit meters with 10mV and 1mA resolution
Switchable remote sense terminals for perfect regulation at the load
DC output switch enables voltage/current setup without load connected
Safety terminals accept fixed shroud 4mm plugs plus forks and wires
Silent fan-free convection cooling all models except EX2020R & EX4210R (intelligent fan cooling)




EX Series: EX355P
 
Opto-isolated RS-232 interface
Front panel controls can be locked out

 
The EX355P is a digitally controlled version of the EX355 with an isolated RS-232 interface. It offers a low cost solution for a basic programmable PSU, and will be sufficient for many applications where the sophistication and complexity of GPIB are not needed. A simple command set allows remote control of voltage, current and output along with read-back of metering values and operational status. Local control is via three rotary encoders providing rapid and accurate setting of voltage and current.



EX752M Digital Multi-mode Dual Output PSU
 
Separate voltage and current meters for each output
Safety output terminals




EX-R Series Dual and Triple Output PSUs EX354RD & EX354RT
 
Switchable remote sense terminals for perfect regulation at the load
EX354RT has auxiliary output of 1.5V to 5V at 5A




Approvals
EN61010-1 (Safety) and EN61326 (EMC)
Supplied with
user manual and mains lead

Specifications
Attribute Value
Output Voltage 0 → 20V
Output Current 0 → 20A
Number of Outputs 1
Type Digital
Power Rating 400W
Supply Voltage 115 V ac, 230 V ac
Number of Displays 2
Input Connector IEC 320
Output Connector Binding Post Terminal
Minimum Temperature +5°C
Maximum Temperature +40°C
 

Lihat detail lebih lanjut tentang Hexo Industries (M) Sdn Bhd
Hexo Industries (M) Sdn Bhd
Hexo Industries (M) Sdn Bhd Measuring Instruments Supplier Malaysia, Leak Detection Systems Supply Penang, Power Tools Supplies Singapore, Indonesia ~ Hexo Industries (M) Sdn Bhd