Cementitious Waterproofing Coating
Obaproof AB-Bond 7 is a cementitious two part polymer-modified product which is mixed to a slurry consistency and applied to concrete and mortar to provide waterproofing.
Uses:
Obaproof AB-Bond 7 will bridge pre-existing static hair-line cracks and is effective for waterproofing the following areas:
• Terraces and balconies
•RC gutters
• Bathroom floors and walls
• Planter boxes
Characteristics:
• Pre-batched components
• Mixes and applies easily
• Slurry or trowellable consistency
• Good adhesion to sound substrates
• Waterproofs and damp proofs masonry surfaces
Consumption:
• Waterproofing of bathrooms, terraces and balconies:
1.0 kg/m per coat, minimum 2 coats.
• Waterproofing coating up to 1 m waterhead:
1.5 kg/m per coat, minimum 2 coats.
• Waterproofing coating more than 1 m waterhead:
2.0 kg/m per coat, minimum 2 coats.
Note: Obaproof AB-Bond 7 must be applied in a minimum of 2 coats. 3 coats may be required in areas of extremely high infiltration.
Mixing:
Under normal circumstances, when the full quantities of both parts are mixed together, a slurry consistency will result. The consistency of the mix can be altered by reducing the amount of Part A (liquid) to be used. For a trowellable consistency, use only 90% of Part A (1kg).Add 700g clean water to mix continer, then slowly adding Part B (5kg)to Part A and stirring with a low speed mixer. Use within 30 minutes.
