EP Digital Force Gauge

EP Digital Force Gauge

1. LCD double digital display with backlight;

2. USB interface; hot swappable.

3. Free setting of fracture alarm value, and upper/lower offset; selection of fracture alarm, alarm for not excess of limit, and alarm for excess of limit. When alarm values are exceeded, the buzzer acts while the display shows alarm information. The two SC open-collector level outputs drive the DC 12V relay or the solenoid to act, each output being 50mA. To use output ports, connect the power adapter first.

4. Display can be rotated 180°.

5. Enable automatic unit conversion: N, kgf, and lbf.

6. Peaks can be held or cleared; clearing time can be set.

7. A maximum of 10 groups of test reports can be saved permanently. The saved content includes peak, and average valley.

8. Shutdown and backlight can be set to perform automatically.

9. Relying on the PC dedicated test software, the force gauge can realize unlimited storage, transmission, and reproduction of test curve data.

10. Installed on different test benches, the force gauge can implement various tests.

 

Specifications and Parameters (for Embedded Products).

  Specifications and Parameters (for External Products)