Makita TD003GA201/ GZ 40Vmax Cordless Impact Driver: Pilihan Terbaik di Kuala Lumpur (KL), Malaysia, Selangor, Sentul CHENG HUAT HARDWARE (SENTUL) SDN BHD

Deskripsi

Combination of sufficient fastening performance and high cost-competitiveness achieved by carefully selecting the functionsr
Simple impact power selection:
- 4 modes (Max/ Hard/ Medium/ Soft for bolt)
- 1 T-mode (for thin metal only)
Max fastening torque: 210 N·m
- Despite increased cost-competitiveness, the max fastening torque is close to that of TD001G, the flagship model of our XGT Impact drivers
- Extended overall length ensures sufficient performance of hammer, enabling to outperform TD001G in heavy-duty operation
Excellent performance in continuous heavy-duty operation
High power 40Vmax XGT Li-Ion battery reduces the current load on the controller, allowing for continuous heavy-duty operation
Constant speed control allows to operate the tool at the same speed as that at which you operate the tool on a full charged battery, even when the remaining battery capacity becomes low
One-touch bit installation
- Smoother installation of the bit has been achieved by reducing the resistance against insertion of the bit
- By increasing the load of sleeve holding spring, we have reduced the chance of unexpected falling off of the bit

Capacity	Machine Screw: M4 - M8 (5/32 - 5/16") Standard Bolt : M5 - M16 (3/16 - 5/8") Coarse Thread (in length): 22 - 125 mm (7/8" - 4-7/8") Steel: 22 mm (7/8") Wood (Auger Bit): 24 mm (15/16") High Strength Bolt: M5 - M14 (3/16 - 9/16")
Hex Shank	6.35 mm (1/4")
Impacts Per Minute (IPM)	Max: 0 - 4,100 \| Hard: 0 - 3,600 Med: 0 - 2,600 \| Soft: 0 - 1,400
Max Fastening Torque	210 N·m (1,860 in. lbs.)
No Load Speed (RPM)	Max: 0 - 3,700 \| Hard: 0 - 3,200 \| Med: 0 - 2,100 Soft: 0 - 1,100 \| T mode: 0 - 2,400
Dimensions (L x W x H)	121 x 86 x 245 mm (4-3/4 x 3-3/8 x 9-5/8")
Net Weight	1.7 - 2.9 kg (3.7 - 6.4 lbs.)
Work Amount (approx.)	280 pcs with BL4025 Coarse thread screw 120 mm
* Recommended batteries 2.0Ah, 2.5Ah, 4.0Ah Standard Equipment Belt Clip Available Options GA201: 1x Standard Charger, 2x 2.0Ah Battery, 1x Makpac Connector Box GZ: Without Charger, Battery & Carrying Case